Editing Ppp Options; Remote Node Filter; Figure 4-3 Menu 11.2 - Remote Node Ppp Options; Table 4-2 Remote Node Ppp Options Menu Fields - ZyXEL Communications Prestige 642 User Manual

successful authentication, please make sure that you specify the correct authentication protocol when
connecting to such an implementation.

4.1.4 Editing PPP Options

To edit the remote node PPP Options, move the cursor to the Edit PPP Options field in Menu 11.1 -
Remote Node Profile, and use the space bar to select Yes. Press Enter to open Menu 11.2, as shown
next.
Press Space Bar to Toggle.

Figure 4-3 Menu 11.2 - Remote Node PPP Options

The following table describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.

Table 4-2 Remote Node PPP Options Menu Fields

Field
Encapsulation
Compression
Once you have completed filling in Menu 11.2 – Remote Node PPP Options, press [Enter] at the
message [Press ENTER to Confirm...] to save your configuration, or press [Esc] at any time to
cancel.

4.1.5 Remote Node Filter

Use Menu 11.5 – Remote Node Filter to specify the filterset(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige. You can specify up to 4 filter sets separated by comma,
e.g., 1, 5, 9, 12, in each filter field. The default is no filters.
Remote Node Configuration
Prestige 642 ADSL Internet Access Router
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Press ENTER to CONFIRM or ESC to CANCEL:
Description
Select the CISCO PPP only when this remote node
is a Cisco machine; otherwise, select the Standard
PPP.
Turn on/off Stac Compression. The default for this
field is Off.
Option
Standard
PPP
CISCO
PPP
On/Off
(Default =
Off)
4-5