Backup Configuration; Figure 10-10 Backup Configuration; Figure 10-11 Hyperterminal Screen - ZyXEL Communications Prestige 643 User Manual

FILE TYPE INTERNAL
Firmware Ras

10.6 Backup Configuration

Entering 5 from Menu 24 – System Maintenance allows you to backup the current Prestige configuration
to your workstation. Backup is highly recommended once your Prestige is functioning properly.
You must perform backup and restore through the console port. Any serial communications program should
work fine; however, you must use XMODEM protocol to perform the download/upload.
Please note that the terms "download" and "upload" are relative to the workstation. Download means to
transfer from another machine to the workstation; upload means from your workstation to another machine.
Step 1. Go to Menu 24.5 (shown next).
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
Step 2. Press "Y" to indicate that you want to continue.
The following procedure is for the HyperTerminal program. The procedure for other serial communications
programs should be similar. Run the HyperTerminal program.
Step 1. Click "Transfer", then "Receive File" to display the following screen.
Finally,
click
Send.
System Maintenance
EXTERNAL
NAME NAME
*.bin

Figure 10-10 Backup Configuration

Figure 10-11 HyperTerminal Screen

DESCRIPTION
the trace log.
This is the generic name for the ZyNOS
firmware on the Prestige.
Prestige 643 ADSL Router
COMMAND
ATUR
Enter where the rom
configuration file is on
your computer.
Choose the
Xmodem
Protocol.
AT
10-11