Remote Node Filter - ZyXEL Communications Prestige 650ME User Manual

Adsl bridge
Table of Contents

Advertisement

FIELD
My WAN Addr
NAT
Metric
Private
RIP Direction
Version
Multicast
IP Policies
4.3

Remote Node Filter

Move the cursor to the Edit Filter Sets field in menu 11.1, then press [SPACE BAR] to select Yes. Press
[ENTER] to display Menu 11.5 – Remote Node Filter.
Remote Node Configuration
Table 4-2 Remote Node Network Layer Options
Some implementations, especially UNIX derivatives, require separate
IP network numbers for the WAN and LAN links and each end to
have a unique address within the WAN network number. In that case,
type the IP address assigned to the WAN port of your Prestige.
NOTE: Refers to local Prestige address, not the remote router
address.
Select SUA Only if you have just one public WAN IP address for your
Prestige. See section on NAT for more information.
Select None to disable NAT.
The metric represents the "cost" of transmission for routing purposes.
IP routing uses hop count as the cost measurement, with a minimum
of 1 for directly connected networks. Type a number that
approximates the cost for this link. The number need not be precise,
but it must be between 1 and 15. In practice, 2 or 3 is usually a good
number.
This determines if the Prestige will include the route to this remote
node in its RIP broadcasts. If set to Yes, this route is kept private and
not included in RIP broadcast. If No, the route to this remote node will
be propagated to other hosts through RIP broadcasts.
Press [SPACE BAR] to select the RIP Direction and press [ENTER].
Options are Both, In Only, Out Only or None.
Press [SPACE BAR] to select the RIP version and press [ENTER].
Options are RIP-1, RIP-2B or RIP-2M.
IGMP-v1 sets IGMP to version 1, IGMP-v2 sets IGMP to version 2
and None disables IGMP.
You can apply up to four IP Policy sets (from 12) by typing in their
numbers separated by commas. Configure the filter sets in menu 25
first (see the IP Policy Routing chapter) and then apply them here.
DESCRIPTION
Prestige 650ME ADSL Bridge
EXAMPLE
SUA Only
3, 4, 5, 6
2
No
None
RIP-1
None
4-7

Advertisement

Table of Contents
loading

Table of Contents