Lan-To-Lan Application With Novell Ipx; Figure 6-3 Menu 3.3 - Novell Ipx Ethernet Setup; Table 6-1 Novell Ipx Ethernet Setup Fields - ZyXEL Communications Prestige 643 User Manual

Prestige 643 ADSL Router
Press Space Bar to Toggle.
The following describes the Novell IPX Ethernet Setup menu.
FIELD
Seed Router Choose Yes if your Prestige is to act as a seed router; otherwise, choose
No.
Frame Type Choose Yes to enable or No to disable the individual frame type.
Enable only the individual frame types that are actually used on your
network. Frame types are 802.2, 802.3, Ethernet II and SNAP.
IPX Network If your Prestige is a seed router, enter a unique network number for each
# frame type enabled.
ENTER
Press [ ] at the message "P
ESC
[ ] at any time to cancel.
6.4

LAN-to-LAN Application With Novell IPX

A typical LAN-to-LAN application uses your Prestige to call from a branch office to the corporate
headquarters enabling the stations in the branch office to access the NetWare servers at the headquarters, as
depicted in the next figure.
6-4
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
Press ENTER to Confirm or ESC to Cancel:

Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup

Table 6-1 Novell IPX Ethernet Setup Fields

DESCRIPTION
ress ENTER to Confirm..."
to save your configuration, or press
OPTIONS
No
(default)
No
(default)
IPX Configuration