Turning On Your Prestige; Figure 2-4 Connecting A Microfilter; Figure 2-5 Power-On Display - ZyXEL Communications Prestige 643 User Manual

Wall Jack
2.6

Turning on Your Prestige

At this point, you should have connected the console port, the ADSL line, the Ethernet port and the power
port to the appropriate devices or lines. You can now apply power to the Prestige.
Step 1. Initial Screen
When you turn on your Prestige, it performs several internal tests as well as line initialization. After the
initialization, the Prestige asks you to press [ENTER] to continue, as shown.
Copyright (c) 1994 - 2002 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:a0:c5:01:23:45
HWSAR (FPGA) : programing (11969) ... done
HWSAR (FPGA) : testing . . . done
WAN Channel init . . . . done
Loading ADSL modem F/W
............................................... done
Press ENTER to continue...
Step 2. Entering Password
The login screen appears after you press [ENTER], prompting you to enter the password, as shown next.
Hardware Installation & Setup
Y -CONNECTOR

Figure 2-4 Connecting a Microfilter

Figure 2-5 Power-On Display

Prestige 643 ADSL Router
Prestige
Microfilter
Wall Phone
Side Side
2-5