Meet Me Conference - NEC UNIVERGE SV8100 Configuration Manual

Issue 2.00
Long Conversation Cutoff
For incoming and outgoing central office calls, each trunk can be programmed to
disconnect after a defined time. The time begins when the trunk is seized and
disconnects the call after the time expires.
When used with the Warning Tone for Long Conversation feature, the system can
provide a warning tone on outgoing trunks calls before the call is disconnected.
Maintenance
The UNIVERGE SV8100 system has several utilities to assist in troubleshooting and
diagnosing problems both during and after installation.
PCPro can remotely access the UNIVERGE SV8100 for maintenance and
diagnostics. Within PCPro, the debug terminal can be accessed to monitor the
systems activity and logging. PCPRo also has built-in reports that can display alarm
data. If need be, an option in PCPro allows the technician to reset or initialize the
system remotely. If the technician determines the problem is isolated to a specific slot,
PCPro can reset only the slot in question.
The SV8100 Maintenance manual contains a number of flow charts to help
technicians diagnose and resolve problems that may arise during and after the
installation of the UNIVERGE SV8100 system.

Meet Me Conference

With Meet Me Conference, an extension user can set up a Conference with their
current call and up to 31 other internal or external parties. Each party joins the
Conference by dialing a Meet Me Conference code. Meet Me Conference lets
extension users have a telephone meeting – without leaving the office.
The CD-CP00 provides two blocks of 32 conference circuits, allowing each block to
have any number of internal or external parties conferenced up to the block limit of 32.
Meet Me Paging
Meet Me Paging allows an extension user to Page a co-worker and privately meet
with them on a Page zone. The Paging zone is busy to other users while the meeting
takes place. While the co-workers meet on the zone, no one else can hear the
conversation, join in, or make an announcement using that zone. Meet Me Paging is a
good way to talk to a co-worker when their location is unknown. If the co-worker can
hear the Page, they can join in the conversation.
2 - 28
UNIVERGE SV8100
Features