User Programming Ability - NEC UNIVERGE SV8100 Configuration Manual

UNIVERGE SV8100
Flexible Network Routing
Use network routes to set up single-channel networking between many separate
systems – or use multiple networking channels per system for greater network
performance. Data tables in the system program define the routing for each extension
in each network node. These tables are easily customized to meet the requirements
of each networking configuration. Users may place an intercom call or transfer a call
to any extension at any location by dialing an extension number. The system analyzes
each extension number received and determines how to route the call to its final
destination. The feature which handles this route selection is called Flexible Routing
(F-Routing). F-Routing also can select alternate routes to the destination extension if
the primary destination is busy. Up to 120 routes are available for networking. After an
extension number is dialed, the system checks the routing, accesses the assigned
trunk group and places the call. Each extension is assigned a route or routes that
decide which trunk group to access and any modified dialed data if required.
Universal Slots
The UNIVERGE SV8100 has six universal slots, and up to four cabinets can be
installed. The system uses the same chassis for the Controlling and Expansion and
can support up to 24 Universal Slots.
The 9.5" chassis has 2 universal slots.

User Programming Ability

A station user can perform programming functions. Speed Group Dialing and
Function Keys are just two features programmable from a station.
Virtual Extensions
Virtual Extensions are available software extensions on the Basic and Expanded Port
Packages. A Virtual Extension assigned to a line key, can appear and ring on an
individual station or multiple stations and be used for outbound access.
Virtual Extensions (VE) are shared with Call Arrival (CAR) Keys. In virtual extension
mode, the key acts as a secondary extension. Up to 256 CAR/VE keys are provided.
VM8000 InMail
The VM8000 InMail is a low cost voice mail solution that mounts onto the CD-CP00.
Its programming is fully integrated with chassis programming. This system offers
most voice mail system features customers expect.
Automated Attendant automatically answers the system incoming calls. After
listening to a customized message, an outside caller can dial a system extension or
use Voice Mail.
Configuration Guide
Issue 2.00
2 - 59