NEC UNIVERGE SV8100 Configuration Manual page 67

UNIVERGE SV8100
The UNIVERGE SV8100 system allows up to eight External Paging zones, or a
common zone output provided by the CPU (Speaker 9). All other speakers (1~8)
require a port on a PGD(2)-U10 ADP, with a maximum of two external paging circuits
per module. You must have four PGD(2)-U10 ADPs to get the eight external zones.
Each external zone has an associated relay contact. When a user pages to a zone,
the corresponding contact activates (closes). This provides for Paging amplifier
control.
Combined Paging
Use Combined Paging when you want to simultaneously Page into an internal and
corresponding external zone. For example, you can Page your company warehouse
and outside loading dock at the same time. Combined Paging is available for zones
1~8 and All Call. You can program a Function Key as a Combined Paging key. Using
the External Page Function Key, when an All Call External Page Function Key is
programmed, it includes both the external zones and the assigned internal zone(s). If
the internal page zone is busy or there are no extensions in a page group, the
announcement is made on the external zones only.
Paging, Internal
Internal Paging lets extension users broadcast announcements to other multiline
terminal users. When a user makes a Zone Paging announcement, the
announcement broadcasts to all idle extensions in the zone dialed. With All Call
Paging, the announcement broadcasts to all idle extensions programmed to receive
All Call Paging. An extension can be a member of only one Internal Paging Zone. Like
External Paging, Internal Paging allows a user to locate another employee or make
an announcement without calling each extension individually.
Combined Paging
Use Combined Paging when you want to simultaneously Page into an internal and
corresponding external zone. For example, you can Page your company warehouse
and outside loading dock at the same time. Combined Paging is available for Paging
zones 1~8 and All Call. Optionally, you can change the Combined Paging
assignments. For example, you can associate External Paging Zone 1 with Internal
Paging Zone 4. You can program a Function Key as a Combined Paging key. When
an All Call External Page Function Key is programmed, it includes both the external
zones and the assigned internal zone(s). If the internal page zone is busy or there are
no extensions in a page group, the announcement is made on the external zones
only.
Park
Park places a call in a wait state (called a Park Orbit) so that an extension user may
pick it up. There are two types of Park: System and Personal. System Park allows a
user to have a call wait in System Orbit.
Configuration Guide
Issue 2.00
2 - 33