NEC UNIVERGE SV8100 Configuration Manual page 116

Issue 2.00
M
S 3
AINTENANCE
ECTION
Installing Interface Blades without Disrupting Ongoing Calls
Each interface and optional blade has an LED indication of power status. An
interface blade (except the CD-CP00) with this switch OFF can be removed or
installed with the system power on.
The combination of status indication and blade replacement with power on allows the
maintenance technician to replace suspect circuits without disrupting ongoing calls.
Up/Down Load of Data
Using PC Programming, Station Speed Dial data, System Speed Dial data, and all
System Data can be transferred from/to a PC. The Up/Down Load may be
accomplished from a local or remote location.
4 - 4 Installation, Programming, and Maintenance Overview
UNIVERGE SV8100