Table of Contents
Advertisement
Piranha HN RoHS User Manual
WARNING: It is extremely important that you apply the appropriate voltages to your
!
camera. Incorrect voltages will damage the camera. See
details.
LED Status Indicator
The camera is equipped with a red/green LED used to display the operational status of the camera. The
table below summarizes the operating states of the camera and the corresponding LED states.
When more than one condition is active, the LED indicates the condition with the highest priority. Error
and warning states are accompanied by corresponding messages further describing the current camera
status.
Table 2: Diagnostic LED
Priority
Color of Status LED
1
Flashing Red
2
Solid Red
3
Flashing Green
4
Solid Green
Teledyne DALSA
Diagnostic LED
Camera Link (Medium or Full Configuration)
Camera Link (Base, Medium or Full Configuration)
+12VDC to +15VDC and Ground
Figure 3: Piranha HN-xx Input and Output Connectors
Meaning
Fatal Error. Camera temperature is too high and camera thermal
shutdown has occurred or a power on failure has been detected.
Warning. Loss of functionality.
Camera initialization or executing a long command (e.g., flat field
correction command ccf)
Camera is operational and functioning correctly.
Power Connector
for more
11
03-032-20135-00
Hide quick links:
Advertisement
Table of Contents
