Table of Contents
Advertisement
36
Setting the Pixel Readout Direction
Purpose:
Sets the tap readout from left to right or from right to left. This command is useful if the
camera must be mounted upside down.
Syntax:
smm i
Syntax Elements:
i
Notes:
Figure 15: Left to Right Readout (smm 0) Forward Direction Example Output
Figure 16: Right to Left Readout (smm 1) Forward Direction Example Output
Figure 17: Camera Pixel Readout Direction Example using 4k Model with Inverting Lens
Pixel 1
smm 1
Right to left
Pixel 4096 to 1
8K orientation reference
03-032-20135-00
Readout direction. Allowable values are:
0 = All pixels are read out from left to right.
1 = All pixels are read out from right to left.
•
To obtain the current readout direction, use the command gcp or get smm.
•
This command is available in both TDI and Area Mode.
•
Refer to the following figures and tables for an explanation of pixel readout and
mirror direction.
•
Refer to
Image Sensor
direction.
Pixel 4096
Pixel 1 to 4096
for sensor architecture diagrams that illustrate sensor readout
Camera can be imaging
in either Forward or Reverse
direction
Piranha HN RoHS User Manual
Teledyne DALSA
Hide quick links:
Advertisement
Table of Contents
