Table of Contents
Advertisement
Built-In Self-Test Codes (BIST)
In the Camera Information screen shot example above, the Power-On Status is showing the 23
status flags where '1' is signaling an issue. When there are no issues, the Power-On status will
indicated "Good".
Details of the BIST codes can be found in the Trouble Shooting Guide in Appendix B.
Camera Power-Up Configuration Selection Dialog
CamExpert provides a dialog box which combines the menu option used to select the camera's
power-up state and the options for the user to save or load a camera state as a specific user set
that is retained in the camera's non-volatile memory.
Camera Power-up Configuration
The first drop list selects the camera configuration state to load on power-up (see feature
UserSetDefaultSelector). The user chooses from one factory data set or from one of eight available
user-saved states.
User Set Configuration Management
The second drop list allows the user to change the camera configuration anytime after a power-up
(see feature UserSetSelector). To reset the camera to the factory configuration, select Factory
Setting and click Load. To save a current camera configuration, select User Set 1 to 8 and click
Save. Select a saved user set and click Load to restore a saved configuration.
Camera Control Category
The Piranha XL camera control category, as shown by CamExpert, groups control parameters such
as line rate, exposure time, scan direction, and gain.
The Piranha XL XDR Camera
• 47
Advertisement
Table of Contents
