Input Signals, Camera Link; Output Signals, Camera Link - Dalsa Piranha HN HN-80-08k40-R User Manual

14
Table 6: Teledyne DALSA Camera Control Configuration
Signal
CC1
CC2
CC3
CC4
See Camera Link Configuration Tables
tables, and refer to the Teledyne DALSA Web site,
Camera Link documents.

Input Signals, Camera Link

The camera accepts control inputs through the Camera Link MDR26F connector.
The camera ships in internal sync, internal programmed integration (exposure mode 7) TDI Mode.
EXSYNC (Triggers Frame Readout)
Frame rate can be set internally using the serial interface. The external control signal EXSYNC is optional
and enabled through the serial interface. This camera uses the falling edge of EXSYNC to trigger pixel
readout. See section Exposure Mode and Line/Frame Rate
times, and camera modes.
Direction Control
You control the CCD shift direction through the serial interface. With the software command,
determine whether the direction control is set via software control or via the Camera Link control signal
on CC3. Refer to section

Output Signals, Camera Link

These signals indicate when data is valid, allowing you to clock the data from the camera to your
acquisition system. These signals are part of the Camera Link configuration and you should refer to the
Teledyne DALSA Camera Link Implementation Road Map, available at
standard location of these signals.
Clocking Signal
LVAL (high)
DVAL (high)
STROBE (rising edge)
FVAL (high)
IMPORTANT: This camera's data should be sampled on the rising edge of STROBE.
The camera internally digitizes to 14 bits and outputs 8 or 12 MSB bits depending on the camera's
Camera Link operating mode. Refer to
03-032-20135-00
Configuration
EXSYNC
Spare
Forward
Spare
for the complete Teledyne DALSA Camera Link configuration
Setting the Camera's CCD Shift Direction
Indicates
Outputting valid line
Valid data
Valid data
Outputting valid frame
Setting the Camera Link Mode
Knowledge Center application
for details on how to set frame times, exposure
for details.
the Knowledge
for details.
Piranha HN RoHS User Manual
notes, for the official
, you
scd
Center, for the
Teledyne DALSA