Appendix A - Specifi Cations And Optional Equipment; Inverter/Charger Specifi Cations - Magnum Energy ME Series Owner's Manual

Appendix A - Specifi cations
Appendix A - Specifi cations and Optional Equipment
A-1 Inverter/Charger Specifi cations
Inverter Specifi cations
Input Battery Voltage Range
Absolute Maximum DC Input
AC Output Voltage Accuracy
Output Frequency and Accuracy
Continuous Power Output (at 45° C)
Continuous AC Output Current
1 msec Surge Current (amps AC)
100 msec Surge Current (amps AC)
5 sec Surge Power (real watts)
30 sec Surge Power (real watts)
5 min Surge Power (real watts)
30 min Surge Power (real watts)
Rated Input Battery Current
Inverter Effi ciency (peak)
HBCO/HBCI (High Battery Cut Out/In)
LBCO/LBCI (Low Battery Cut Out/In)
Series Stacking 120/240 VAC
Transfer Time
Search Mode (typical)
No Load (120 VAC output, typical)
Waveform
Charger Specifi cations
Continuous Output at 45°C
Input Current - Rated Output (AC amps)
Charger Effi ciency
AC Input Frequency Range
AC Input Voltage Range
Power Factor
General Features and Capabilities
Transfer Relay Capability
Five-stage Charging Capability
Battery Temperature Compensation
Internal Cooling
Overcurrent Protection
Over-temperature Protection
Corrosion Protection
Safety Listings
Warranty
Dual Branch-Rated Output Breakers
Environmental Specifi cations
Operating Temperature
Non-operating Temperature
Operating Humidity
Physical Specifi cations
Unit Dimensions (h x w x d)
Shipping Dimensions (h x w x d)
Mounting
Unit Weight
Shipping Weight
Max operating altitude
Specifi cations @ 25°C (unless otherwise noted) - Subject to change without notice.
Page 49
ME2000 (-15B, -20B) ME2012 (-15B, -20B)
9 to 16 VDC
25 VDC
2000 VA
17 A
60
37
3700
3450
3100
2400
191 ADC
95%
20 watts
100 ADC
15
Single leg in at 30 amps
Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
0 to 120 cfm variable speed drive using dual 92 mm brushless DC fan
PCB's conformal coated, powder coated chassis/top, and stainless steel fasteners
ETL listed to UL/cUL 458, and CSA C22.2 # 107.1-01
Optional on ME2000 (15 or 20 amp breakers) or ME2012 (15 or 20 amp breakers)
13.75" x 12.65" x 7.0" (17.8 cm)
18.5" x 17.5" x 12.5" (47 cm x 44.5 cm x 31.8 cm)
Shelf (top or bottom up) or wall (no uncovered vents on top or bottom)
37 lb (16.8 kg)
42 lb (19.1 kg)
ME2512
9 to 16 VDC
25 VDC
120 VAC ±5% (≤ continuous power)
60 Hz ± 0.1 Hz
2000 VA
17 A
60
37
3700
3450
3100
2400
191 ADC
95%
≥15.8 VDC
9.0 VDC (adj)/12.5 VDC
No
16 msecs
5 watts
20 watts
Modifi ed Sine Wave
100 ADC
15
85%
50 to 70 Hz
60 to 140 VAC (120 VAC nominal)
> 0.95
Two input legs at 30 amps each, or combine for 60 amps
Yes, 15 ft Battery Temp Sensor standard
Yes, with two overlapping circuits
Yes, on transformer, MOSFETS, and battery
3 years parts and labor
-20°C to +60°C (-4°F to 140°F)
-40°C to +70°C (-40°F to 158°F)
0 to 95% RH non-condensing
13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm)
37 lb (16.8 kg) 41 lb (18.6 kg)
42 lb (19.1 kg) 46 lb (20.9 kg)
15,000' (4570 m)
© 2010 Magnum Energy, Inc
ME3112
9 to 16 VDC 9 to 16 VDC
25 VDC 25 VDC
2500 VA 3100 VA
21A 26 A
100 120
45 50
5000 6000
4500 4800
3500 3950
2900 3500
239.1 ADC 296.5 ADC
91% 90%
23 watts 25 watts
120 ADC 160 ADC
18 21
46 lb (20.9 kg)
51 lb (23.1 kg)