Optional Equipment And Accessories - Magnum Energy MMS Series Owner's Manual

Appendix A – Optional Equipment and Accessories
A-1

Optional Equipment and Accessories

The following Magnum Energy components are available for use with
the MMS Series inverter/charger. Some of these items are required
depending upon the intended use of the inverter.
MM-RC Remote Control (LED Display)
The MM-RC Remote Control is simple to use; the LEDs can be used
to turn the inverter on and off (ON/OFF), monitor inverter status
(INVERT), determine the status of any external AC power (AC IN),
and be alerted of any faults (FAULT). It also has three additional LED
indicators for charger status (BULK, ABSORB, FLOAT).
Basic Remote Control (LCD Display)
The ME-RC50 Remote Control panel is simple to use; an LCD screen
and "at a glance" LEDs display complete inverter/charger status. Soft
keys provide simple access to menus and a rotary encoder knob allows
you to scroll through and select a wide range of settings.
Auto Generator Start Controller
The ME-AGS-N Automatic Generator Start controller (Network
version) is designed to automatically start your generator based on
low battery condition or high temperature. It works with 12, 24, and
48 volt battery banks and includes a 4-position DIP (Dual In-line
Package) switch which provides the ability to change the relay timing
confi gurations to allow compatibility with a wider range of generators.
Battery Monitor Kit
The ME-BMK Battery Monitor Kit is a single battery bank amp-hour
meter that monitors the condition of the battery and provides
information to let you know how much energy you have available
and to plan your electrical usage to ensure the battery is not being
over-discharged. The ME-BMK-NS version does not include a DC
shunt—order the ME-BMK to receive a 500A/50mv DC shunt.
Fuse Block/Fuses
The Magnum Fuse/Fuse-blocks are used to protect the battery bank,
inverter, and cables from damage caused by DC short circuits and
overloads. They include a slow-blow fuse with mounting block and
protective cover. The 125 and 200-amp models use an ANL type
fuseand the 300 and 400-amp models use a Class-T fuse.
DC Load Disconnect
The MM-DCLD (DC Load Disconnect) pigtail adapter is designed to
provide a means to DISABLE the inverter function when a 12-volt
DC signal is removed.
Ignition Switch Activate
The MM-ISA (Ignition Switch Activate) is a pigtail adapter is designed
to automatically ENABLE the inverter function when a 12-volt DC
signal is supplied.
© 2017 Sensata Technologies 43