Appendix A - Optional Equipment And Accessories - Magnum Energy MM AE Series Owner's Manual

Appendix A - Optional Equipment and Accessories

Appendix - Optional Equipment and Accessories
The following Magnum Energy components are available for use
with the MM-AE Series inverter/charger. Some of these items are
required depending upon the intended use of the inverter.
Smart Battery Combiner
The Smart Battery Combiner (ME-SBC
charge a second battery using a portion of the current that is charging
the main battery. The ME-SBC eliminates a signifi cant voltage drop,
and provides automatic turn-on and turn-off based on adjustable volt-
age set-points. This allows different batteries to be charged from a
single charging source, and prevents overcharging/undercharging.
Basic Remote Control
The ME-RC50 Remote Control Panel is simple to use; an LCD screen
and "at a glance" LEDs display complete inverter/charger status. Soft
keys provide simple access to menus and a rotary encoder knob al-
lows you to scroll through and select a wide range of settings.
Auto Generator Start Controller
The ME-AGS-N Automatic Generator Start controller (Network ver-
sion) is designed to automatically start your generator based on low
battery condition or high temperature.
an input voltage jumper (for 12, 24, and 48 volt battery banks) and
a 4-position DIP (Dual In-line Package) switch which provides the
ability to change the relay timing confi gurations to allow compatibility
with a wider range of generators.
Battery Monitor Kit
The ME-BMK Battery Monitor Kit is a single battery bank amp-hour
meter that monitors the condition of the battery and provides infor-
mation to let you know how much energy you have available and
let you plan your electrical usage to ensure the battery is not being
over-discharged. The ME-BMK-NS version does not include
– order the ME-BMK to receive a 500A/50mv DC shunt.
Fuse Block/Fuses
The Magnum Fuse/Fuse-blocks are used to protect the battery bank,
inverter, and cables from damage caused by DC short circuits and
overloads. They include a slow-blow fuse with mounting block and
protective cover. The 125 and 200 amp models use an ANL type fuse
and the 300 and 400 amp models use a Class-T fuse.
DC Load Disconnect
The MM-DCLD (DC Load Disconnect) pigtail adapter is designed to
provide a means to DISABLE the inverter function when a 12 volt
DC signal is removed.
Ignition Switch Activate
The MM-ISA is a pigtail adapter designed to automatically ENABLE
the inverter function when a 12 volt DC signal is supplied.
© 2010 Magnum Energy, Inc.
) is designed to monitor and
TM
The AGS controller includes
a DC shunt
35