Appendix A - Specifi Cations And Optional Equipment; Inverter/Charger Specifi Cations - Magnum Energy ME3112-U Owner's Manual

Appendix A – Specifi cations and Optional Equipment
Appendix A – Specifi cations and Optional Equipment
A-1 Inverter/Charger Specifi cations
Models
Inverter Specifi cations
Input Battery Voltage Range
Absolute Maximum DC Input
AC Output Voltage Accuracy
Output Frequency and Accuracy
Continuous Power Output (@ 45°C)
Continuous AC Output Current
1 msec Surge Current (AAC)
100 msec Surge Current (AAC)
5 sec Surge Power (real watts)
30 sec Surge Power (real watts)
5 min Surge Power (real watts)
30 min Surge Power (real watts)
Rated Input Battery Current
Inverter Effi ciency (peak)
HBCO/HBCI
LBCO/LBCI
Series Stacking 120/240 VAC
Transfer Time
Search Mode (typical)
No Load (120 VAC output, typical)
Waveform
Charger Specifi cations
Continuous Output at 45°C
Input Current - Rated Output (AAC)
Charger Effi ciency
AC Input Frequency Range
AC Input Voltage Range
Power Factor
General Features and Capabilities
Transfer Relay Capability
Five-stage Charging Capability
Battery Temp Compensation
Internal Cooling
Overcurrent Protection
Over-temperature Protection
Corrosion Protection
Safety Listings
Warranty
Dual Branch-Rated Output Breakers
Environmental Specifi cations
Operating Temperature
Non-operating Temperature
Operating Humidity
Physical Specifi cations
Unit Dimensions (h x w x d)
Shipping Dimensions (h x w x d)
Mounting
Unit Weight
Shipping Weight
Max operating altitude
Specifi cations @ 25°C (unless otherwise noted) - Subject to change without notice.
* The pass-thru capability on each leg of the -15B and -20B models is limited by the output breaker size on each output.
Page 42
ME2012 (-15B, -20B)
9 to 16 VDC
25 VDC
120 VAC ±5% (≤ continuous power)
2000 VA
17 A
60
37
3700
3450
3100
2400
266 ADC
95%
20 watts
100 ADC
15
60 to 140 VAC (120 VAC nominal)
Two input legs at 30 amps each, or combine for 60 amps*
Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Yes, 15 ft Battery Temp Sensor standard
0 to 120 cfm variable speed drive using dual 92 mm brushless DC fan
Yes, with two overlapping circuits
Yes, on transformer, MOSFETS, and battery
PCB's conformal coated, powder coated chassis/top, and stainless steel fasteners
ETL listed to UL/cUL 458, and CSA C22.2 # 107.1-01
Optional on ME2012 (15 or 20-amp breakers)
-20°C to +60°C (-4°F to 140°F)
-40°C to +70°C (-40°F to 158°F)
0 to 95% RH non-condensing
13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm)
19" x 15" x 13" (48.3 cm x 38.1 cm x 33 cm)
Shelf (top or bottom up) or wall (no uncovered vents on top or bottom)
37 lb (16.8 kg)
46 lb (20.9 kg)
ME2512
9 to 16 VDC
25 VDC
60 Hz ± 0.1 Hz
2500 VA
21A
100
45
5000
4500
3500
2900
333 ADC
91%
≥15.8 VDC
9.0 VDC (adj)/12.5 VDC
No
16 msecs
5 watts
23 watts
Modifi ed Sine Wave
120 ADC
18
85%
50 to 70 Hz
> 0.95
3 years parts and labor
41 lb (18.6 kg)
51 lb (23.1 kg)
15,000' (4570 m)
© 2017 Sensata Technologies
ME3112
9 to 16 VDC
25 VDC
3100 VA
26 A
120
50
6000
4800
3950
3500
413 ADC
90%
25 watts
160 ADC
22
46 lb (20.9 kg)
56 lb (25.4 kg)