Tech. Rep. Mode; Tech. Rep. Mode Function Setting Procedure - Minolta CF2002 Service Manual

3.

TECH. REP. MODE

3-1.

Tech. Rep. Mode Function Setting Procedure

NOTE
• Ensure appropriate security for Tech. Rep. mode function setting procedures. They
should NEVER be shown to any unauthorized person not involved with service jobs.
<Procedure>
1. Press the Utility key.
2. Press the Meter Count key.
3. Press the following keys in this order.
→ → →
Stop 0 0
4. The Tech. Rep. Mode menu will appear.
<Exiting>
• Touch the "Fin. Time" key.
<Changing the Setting Value in Tech. Rep. Mode Functions>
• Use the ID key to change the + sign to - sign, or vice versa.
• Use the Up/Down key to enter or change the setting value.
• Use the 10-Key Pad to enter the setting value. (To change the setting value, first press
the Clear key before making an entry.)
→ →
Stop 0 1
S-16