2.
DISASSEMBLY/REASSEMBLY
2-1.
DOORS, COVERS, AND EXTERIOR PARTS:
IDENTIFICATION AND REMOVAL PROCEDURES
6
No.
Name
Remove the IR Upper Right Cover.
1
Original Glass
Original Glass fixing brackets (front and rear).
nal Glass.
IR Upper Right
2
Remove three screws and the IR Upper Right Cover.
Cover
Remove the four caps on both sides of the control panel.
3
Control Panel
Remove four screws and the flat cable.
panel.
Remove the IR Lower Front Cover.
4
IR Front Cover
remove the IR Front Cover.
IR Lower Front
Remove the pipe ends (left and right).
5
Cover
the IR Lower Front Cover.
Remove the IR Upper Cover.
6
IR Left Cover
Demount the IR Unit from the Copier Stand.
and the IR Left Cover.
IR Upper
Remove the Original Cover.
7
Cover
Upper Cover.
Disconnect the power cable and ADF cable.
8
IR Rear Cover
Upper Cover.
Remove the IR Upper Cover.
9
IR Right Cover
Demount the IR Unit from the Copier Stand.
and the IR Right Cover.
1
2
3
4
5
9
4025D003AA
Removal Procedure
→
→
Remove two screws and the IR Rear Cover.
D-3
7
4025D004AA
→
Remove one screw and the
→
Remove the Origi-
→
Remove the control
→
Loosen three screws and
→
Remove two screws and
→
Remove the IR Rear Cover.
→
Remove four screws
Remove six screws and the IR
→
Remove the IR
→
Remove the IR Rear Cover.
→
Remove four screws
8
→
→
→