Minolta CF2002 Service Manual page 158

Item
Memory
Check
Compress /
Extension
Check
Memory /
HardDisk
Adjust
Memory
Bus Check
Work
Memory
In/Out
Check
Purpose
To check corre- • Pressing the Start key will automatically
spondence of data start a memory check sequence. As
written to and that soon as the sequence is completed, the
read from memory result of the check will be displayed.
through write/read • If the check result is NG, check the mem-
check. ory for proper connection or change it.
If the copy image <Rough Check>


is faulty. A check is made to see if the image data
reading and writing are correctly made in a
very limited area.
<Detail Check>
A check is made to see if the image data
reading and writing are correctly made at
the addresses and buses in all areas.
The progress of the check sequence is dis-
played in percentage.
To check whether • Pressing the Start key will automatically
compression and start to complete a compression/decom-
decompression are pression check sequence.
carried out prop- • The check result will be displayed, "OK"
erly. or "NG".
If the copy image


is faulty.
To check to see if
• Select either "IR
→
image data is cor-
rectly transferred
• Pressing the Start key will start the mem-
from IR to memory,
ory bus check and be terminated auto-
and from memory
matically.
to printer.
• The check result will be displayed, "OK"
or "NG".
If the copy image


is faulty.
To check to see if • Select either "Input Check," "Output
input and output of Check," or both.
image data of work • Pressing the Start key will start the work
memory are cor- memory input/output operation check
rectly performed. sequence and be terminated automati-
cally.
If the copy image


• The check result will be displayed, "OK"
is faulty.
or "NG".
S-25
Setting/Precautions
→
Memory," "Memory
PRT," or both.