Fusing/Exit Misfeed - Minolta CF2002 Service Manual

(12) Fusing/Exit Misfeed

<Detection Timing>
Type
Fusing/Exit misfeed
detection
Detection of paper left
at Fusing/Exit
<Action>
Exit Sensor (PC10)
Duplex Unit Transport Sensor 1 (PI1)
Step Action
1 Initial check items
2 PC10 I/O check
3 PI1 I/O check
4 Change PWB-IO.
The Exit Sensor (PC10) is not unblocked even after the lapse of a
given period of time after it has been blocked by the paper.
The Duplex Unit Transport Sensor 1 (PI1) is not blocked even after
the lapse of a given period of time after the Exit Sensor (PC10)
has been unblocked by the paper during a switchback sequence.
The Exit Sensor (PC10) is blocked when the Power Switch is
turned ON, a door or cover is opened and closed, or a misfeed or
malfunction is reset.
Relevant Electrical Parts
IO Board (PWB-IO)
Ref. Page
T-12
T-4 to T-10
T-4 to T-10
—
T-29
Description
WIRING DIAGRAM
Control Signal
—
—
—
—
Location
(Electrical
Component)
—
8-F
4-H (AD-14)
—