Minolta CF2002 Service Manual page 143

Item
To select the layout of copy
images in the 4in1 mode.
Original
4in1 Copy
Order
To select whether to center the
image with respect to the paper.
Centering
Copy Program Recall
Purpose
To call up a program registered
through Job Memory Input.
Unit Life Indicator
Purpose
To check each unit for life.
Unit Change
Purpose
To clear the life counters for the Trans-
fer Roller Unit and Paper Dust
Remover/Ozone Filter.
When "User" is selected for "Trans-


fer Roller Unit" and "Paper Powder
Filter/Ozone Filter" available from
"Unit Change" of "System Input"
under "Tech. Rep. Mode."
When the life value is reached.


When the unit is replaced before its


life.
Purpose
• Select the program number.
• If the copier is not equipped with capabilities
(e.g., stapling) that were provided when the pro-
gram was registered, calling up that particular
program is disabled.
• The life indicator of each unit is displayed.
• Allows a list of counter counts to be printed.
• After the Transfer Roller Unit or the Paper Dust
Remover/Ozone Filter has been replaced with a
new one, enter the Utility mode with the Right
Door left open.
• The "Unit Change" key will appear on the
screen.
• Touch the "Unit Change" key and clear the life
counter.
S-10
Setting/Precautions
The default setting is as follows:
1 2
3 4
• The default setting is Yes.
Yes
• Used when the size of the original is
smaller than that of the paper selected
for use.
Setting/Precautions
Setting/Precautions
Setting/Precautions
No