Fiery and the Fiery logo are registered trademarks of Electronics for Im- aging, Inc. Fiery X3e and Fiery Z4 are trademarks of Electronics for Imaging, Inc. DiALTA and NMT are registered trademarks of Minolta Co., Ltd. All other product names mentioned are trademarks or registered trade- marks of their respective companies.
Explanation of Basic Concepts and Symbols ......1-10 Paper Feeding................1-10 “Width” and “Length” ..............1-11 Paper Orientation ................1-11 Display Icons.................1-11 Features ..................1-12 Precautions Installation Precautions..............2-1 Installation site ................2-1 Power source ..................2-1 Space requirements................2-2 Operation Precautions..............2-3 Operating environment..............2-3 Proper use..................2-3 Transporting the copier ..............2-4 CF1501/CF2001...
Page 4
Printing From the Computer ............3-28 Scanning From the Computer ............3-28 Power Switch and Default Settings .......... 3-29 Turning the copier on and off............3-29 To turn the copier on ..............3-29 To turn the copier off ..............3-29 CF1501/CF2001...
Page 5
Manual Feeding (Sheet Documents) ..........5-11 To make copies using manual feeding (sheet documents)...5-11 Manual Feeding (Transparent or Translucent Documents) ..5-12 To make copies using manual feeding (transparent or translucent documents)..............5-12 Manual Feeding (Books)............... 5-13 To make copies using manual feeding (books)......5-13 CF1501/CF2001...
Page 6
Book (Separation) Ö Single-Sided: ..........7-2 Book (Spread) Ö Single-Sided: ............7-3 Book (either Standard Book or RightBound) Ö Book Erase: ... 7-3 To make settings for single- or double-sided documents and copies ..................7-4 To make settings for copying a book..........7-5 CF1501/CF2001...
Page 7
To specify the vertical and horizontal scaling proportions.....7-32 7.11 Reducing the Document to Postcard Size and Printing Multiple Copies on One Page (“Postcard” Function) ....7-33 To set the “Postcard” function ............7-33 7.12 Tiling Copies (“Image Repeat” Function) .........7-35 To set the “Image Repeat” function..........7-35 CF1501/CF2001...
Page 8
Turning off the Sleep function (“Disable Sleep Mode” Function) ..................9-15 To turn off the Sleep function ............9-15 Erasing Copy Edges (“Erase” Function)........9-18 To set the “Erase” function ............9-18 Specifying the Expert Settings (“Expert User’s Mode” Function) ..................9-20 CF1501/CF2001...
Page 9
10.5 When the Message “Cannot staple.” Appears .......10-37 To clear jammed staples ............. 10-37 10.6 When the Inspection Mark “ ” Appears .......10-41 10.7 When the Message “Malfunction detected.” Appears...10-42 10.8 When the Message “Need to Replace XXXXX.” Appears..10-43 CF1501/CF2001...
Page 10
11.2 When the Copier Is Not Operating Correctly ......11-3 12 Appendix 12.1 Specifications ................12-1 Copier CF1501/CF2001 ............... 12-1 Duplexing Document Feeder AFR-16 .......... 12-3 500-sheet Paper Feed Unit PF-118..........12-3 Large-capacity Cabinet PF-117............ 12-4 Duplex Unit AD-14................ 12-4 10-Mailbin Sorter JS-1002............
Introduction Introduction We Want You to Be a Satisfied Customer Thank you for choosing a Minolta CF1501/CF2001. To ensure the best performance and effective use of your copier, this manual will provide information on the following topics: Getting to Know Your Copier.
Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result. Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or electrical shock. CF1501/CF2001...
Page 13
Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Connect the power cord to an electrical outlet that is equipped with a ground- ing terminal. CF1501/CF2001...
Dust that accumulates between the plug terminals may cause a fire. • When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock. CF1501/CF2001...
Do not touch or scratch the surface of the toner unit developing roller and the PC drum, as poor image quality could result. Use the supplies and consumables recommended by the dealer. Use of any supply or consumable not recommended could result in poor image quality and breakdown. CF1501/CF2001...
This device must be used with shielded interface (Parallel) cable and shielded network (10/100Base-T) cable. The use of non-shield cables is likely to result in interference with radio communications and is prohibited under CISPR 22 and local rules. CF1501/CF2001...
Observe all warnings in order to ensure safe use of the copier. CAUTION Failure to observe instructions highlighted in this manner may result in serious injuries or property damage. § Observe all cautions in order to ensure safe use of the copier. CF1501/CF2001...
Page 19
Text formatted in this style pro- vides additional assistance. § Text formatted in this style describes the action that will ensure the desired results are achieved. [Copy] key The names of keys on the control panel are written as shown above. CF1501/CF2001...
During copying, paper is supplied from the right side of the copier and fed into the copy tray on the top or the output option at the left with the printed surface of the copy facing down. The paper feed direction is shown by the arrows in the diagram below. 1-10 CF1501/CF2001...
The icons shown below are displayed when the corresponding paper is load- ed or copy is made. : Overhead projector transparencies : Thick paper 1 : Second side of a double-sided copy : Second side of a double-sided copy on thick paper CF1501/CF2001 1-11...
Introduction Features The Minolta CF1501/CF2001 is a high-speed, high-quality full-color copi- er/printer, combining the functionality and compactness best suited for any office. Delivers high-speed, high-quality full-color copies: High-quality, business-standard images with a resolution of 600 dpi (true) × 1800 dpi (simulated)/256 variations...
Power source The power source requirements are as follows. Voltage fluctuation: Maximum ±10% (AC 127 V areas only: between -10% and +6%) Frequency fluctuation: Maximum ±0.3% Use a power source with as little voltage or frequency fluctuations as possible. CF1501/CF2001...
20 (510) 31 (787) (100) 67-1/4 (1,707) 10-3/4 8-1/4 (275) (210) 48 (1,222) Unit: inch (mm) Note Be sure to allow a clearance of 4 in. (100 mm) or more at the back of the copier for the ventilation duct. CF1501/CF2001...
A negligible amount of ozone is generated during normal operation of this copier. An unpleasant odor may, however, be detected in poorly ventilated rooms during extensive copier operations. § For a comfortable operating environment, it is recommended that the room be well ventilated. CF1501/CF2001...
Store in a sealed plastic bag in a cool, dark place paper that has been removed from its wrapper but not loaded into the copier. Only use toner that has been manufactured specifically for this copier. Never use other types of toner. Keep all supplies out of the reach of children. CF1501/CF2001...
Copies pasted together using adhesive that contains solvent (e.g., spray glue) may dissolve the toner on the copies. Color copies have a thicker layer of toner than normal black-and-white copies. Therefore, when a color copy is folded, the toner at the fold may peel off. CF1501/CF2001...
Copyrighted works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel. CF1501/CF2001...
The main copy settings available with this copier are listed below. For de- tails on their operation, refer to the pages indicated. Orig. ÖCopy (Refer to page 7-1.) Single-Sided Ö Single-Sided Single-Sided Ö Double-Sided Double-Sided Ö Single-Sided Double-Sided Ö Double-Sided Single-Sided ÖSingle–2in1 CF1501/CF2001...
Page 30
The “Double-Sided” and the “Double–2in1” Copy settings are only available if the duplex unit and the memory are installed. Zoom settings (Refer to page 6-14.) Reduced/Full Size/Enlarged Finishing (Refer to page 7-8, page 7-12, and page 7-15.) “Sort” setting CF1501/CF2001...
Page 31
The “Sort” and “Group” settings are only available if the 10-mailbin sorter is installed. The “Staple” and “Hole-Punch” settings are only available if both the finisher and the printer controller are installed, and the print job is sent from the computer. CF1501/CF2001...
Page 32
“OHP Interleaving” function (Refer to page 7-30.) “Frame Erase” function (Refer to page 7-19.) “Mirror Image” function (Refer to page 7-21.) “X/Y Zoom” function (Refer to page 7-32.) “Postcard” function (Refer to page 7-33.) “Image Repeat” function (Refer to page 7-35.) CF1501/CF2001...
Page 33
The “X/Y Zoom”, “Postcard” and “Image Repeat” functions are only available if the memory is installed. “Mixed Orig Detection” function (Refer to page 7-17.) Mixed originals Note The “Mixed Orig Detection” function is only available if the duplexing document feeder is installed. CF1501/CF2001...
Prints the image scanned with the scanner Original cover OC-2 (optional) Presses down on the loaded docu- ment Duplexing document feeder AFR- 16 (optional) Automatically feeds and scans one document sheet at a time, and auto- matically turns over double-sided documents and scans them CF1501/CF2001...
Page 35
When printing from the computer, finishes pages according to the mode (sorting, grouping, stapling or hole-punching) selected at the com- puter, then feeds out the pages Duplex unit AD-14 (optional) Automatically turns over copies, al- lowing double-sided copies to be made CF1501/CF2001...
Page 36
(JS-1002) or an optional fin- isher (FN-107/FN-108) is installed without an optional paper feed unit Copy table (optional) Used when the optional 10-mailbin sorter (JS-1002) or an optional fin- isher (FN-107/FN-108) is installed with two optional paper feed units installed CF1501/CF2001...
Page 37
Fiery X3e and en- ables use as a multifunctional print- Memory (256 MB: 128 MB × 2) M128-2 (optional with CF1501; standard installation with CF2001) Increases the memory of the copier, allowing functions such as dou- ble-sided and 2in1 copying to be performed...
Before Making Copies Parts Names and Their Functions Outside of Copier * The original cover, copier stand, and copy desk shown installed in the illustration are optional. 3-10 CF1501/CF2001...
Page 39
Used for connecting the scanner’s power cord socket (outlet) Scanner connector Used for connecting the scanner hookup cord Printer power cord Used for connecting the printer’s power cord socket Sorter/finisher connec- Used for connecting the sorter or finisher hookup cord CF1501/CF2001 3-11...
Opened when adding toner Imaging unit release le- Used to install and replace the imaging unit Imaging unit removing Used to remove the imaging unit bracket Upper right-side door Opened when replacing the fusing unit or clearing misfeeds 3-12 CF1501/CF2001...
Ozone filter Collects the ozone generated in the copier LED cleaning tool Used to clean the surface of the LED unit, for example when replacing the image transfer belt unit Store in a safe place for later use. CF1501/CF2001 3-13...
Document feed tray Load the documents to be copied face up. See p. 5-4. Misfeed clearing cover Opened when clearing a misfed document F1/F2 Single-sheet feed tray Open to feed one sheet of the document at a time 3-14 CF1501/CF2001...
Before Making Copies Duplex Unit (Optional) Part Name Description Duplex unit door Opened when clearing paper misfed within the duplex unit CF1501/CF2001 3-15...
Collects copies that are sorted Upper door/Lower door Opened when clearing paper misfed within the sorter Horizontal transport Transports copies to the sorter or finisher unit Horizontal transport Opened when clearing paper misfed within the horizontal unit cover transport unit 3-16 CF1501/CF2001...
Sort” setting) Lower paper output Collects copies that are sorted tray Front door Opened when clearing paper misfed within the finisher Right-side door Opened when replacing the staple cartridge or clearing pa- (Finisher FN-107 only) per misfeeds CF1501/CF2001 3-17...
Before Making Copies Paper Feed Unit (Optional) Part Name Description 3rd drawer Holds 500 sheets of paper The paper size can be adjusted freely. 4th drawer As many as two units can be installed. See p. 4-13. 3-18 CF1501/CF2001...
Holds 2,500 sheets of paper See p. 4-15. Printer Controller Fiery Z4 For more details, refer to the manual of the printer controller. Printer Controller Fiery X3e For more details, refer to the manual of the printer controller. CF1501/CF2001 3-19...
• Full Color: The copier makes a full-color copy of the doc- ument. • Black: The copier makes a black-and-white copy regard- less of the color of the document. 3-20 CF1501/CF2001...
Page 49
• The [Scan] key indicator lights up in green to indicate that the copier is in Scanner mode. Keypad • Use to type in the number of copies to be made. • Use to type in the zoom ratio. • Use to type in the various settings. CF1501/CF2001 3-21...
Note The screen illustrations in this manual may be slightly different from the screens that appear on your copier’s touch panel. Organization of Screens Screen tabs Message display Available functions/settings Selected settings 3-22 CF1501/CF2001...
Page 51
Select a different function to display the corresponding screen. Example) The available zoom ratio settings are shown above. * The currently selected setting appears in the tab. Selected settings The current settings are shown by messages and graphics. CF1501/CF2001 3-23...
To activate a function or to select a setting, lightly touch the desired func- tion or setting shown on the touch panel. CAUTION Be careful not to damage the touch panel. § Never push on the touch panel, and never push on it using a hard or pointed object. 3-24 CF1501/CF2001...
The length of time until the copier automatically resets itself can be set between 1 and 9 minutes. The “Auto Panel Reset” parameter can even be turned off. For more details, refer to “Specifying Default Settings (“User’s Choice” Function)” on page 8-8 and page 8-15. CF1501/CF2001 3-25...
The length of time until the copier enters Sleep mode can be set be- tween 15 and 240 minutes. The “Sleep Mode” parameter can even be turned off. For more details, refer to “Specifying Default Settings (“User’s Choice” Function)” on page 8-8 and page 8-17. 3-26 CF1501/CF2001...
Scanning From the Computer If the optional printer controller is installed, the copier can be used as an 11 × 17 in. full-color scanner configured into a computer network. For operating details, refer to the manual for the printer controller. 3-28 CF1501/CF2001...
The length of time until the copier enters Energy Saver mode or Sleep mode can be set using the “User’s Choice” function. For more details, refer to “Specifying Default Settings (“User’s Choice” Function)” on page 8-8, page 8-16, and page 8-17. CF1501/CF2001 3-29...
Number of copies: 1 Original Image Type: Text&Photo Zoom: Full Size (×1.000) Paper: Auto Paper Orig. Ö Copy: Single-Sided Ö Single-Sided Finishing: Non-Sort The default settings can be customized using the “User’s Choice” function. (Refer to page 8-1.) 3-30 CF1501/CF2001...
2: If the optional duplex unit is used to make double-sided copies, only certain types of paper can be used. 3: If the optional 10-mailbin sorter is used to sort or group copies, only certain types of paper can be used. CF1501/CF2001...
LetterL LetterC LegalL tiveL tiveC × 18L Paper Source, Etc. Manual Bypass Tray 1st Drawer 2nd Drawer — — — Paper Feed — — — — Unit Large-Capacity — — — — — — Cabinet Double-Sided Copies Finished Cop- CF1501/CF2001...
Page 61
3: If the optional 10-mailbin sorter is used to sort or group copies, only certain types of paper can be used. 4: The size should be entered using the “User’s Choice” function. 5: The paper size should be changed by your service representative. CF1501/CF2001...
Hammermill Laser Print New Radiant White 24 lbs. For black-and-white MINOLTA Bond I copies MINOLTA Bond IV Thick Paper 1 MINOLTA CF paper 28 lbs. NS 700 Thick Paper 2 NS 1000C Overhead Pro- For full-color copies MINOLTA CF300 (D)
Paper that has been decorated with foil or embossing Paper of various sizes Paper of a non-standard shape (not rectangular) Paper that is bound with glue, staples, or clips Paper with labels attached Paper with ribbons, hooks, buttons, etc. attached CF1501/CF2001...
Not exposed to direct sunlight Not exposed to fire Not exposed to high humidity Not extremely dusty Unwrapped paper should be stored in a plastic bag in a cool, dry loca- tion. Keep paper out of the reach of children. CF1501/CF2001...
Slide the lateral guides to fit the size of paper to be loaded. For paper of a non-standard size, first load the paper, and then adjust the lateral guides to the size of the loaded paper. CF1501/CF2001...
Page 66
§ We recommend replenishing the paper only after all of the paper in the drawer has been used. CF1501/CF2001...
Page 67
Do not load postcards cross- wise, as shown. Are the recommended overhead projector transparencies (MI- NOLTA CF300 (D)) loaded? § When loading the recommend- ed overhead projector transpar- encies (MINOLTA CF300 (D)), load them as shown in the illus- tration. CF1501/CF2001...
Page 68
“Thick 1”. Setting the Paper Size The default setting for the paper size of the 1st drawer is “Auto Detect”. For postcards, non-standard or metric paper sizes, change the paper size according to the procedure in the following section. 4-10 CF1501/CF2001...
Copy Paper To set the paper size for the 1st drawer Press the [Utility] key to enter Utility mode. Touch [User’s Choice]. Touch [2/2] to view the next page. Touch [1st Drawer Paper Select]. CF1501/CF2001 4-11...
Page 70
[Custom Size], touch , and to specify the desired size, and then touch [Enter]. In the Input Size screen, touch [Enter]. In the 1st Drawer Paper Size screen, touch [Enter]. In the User’s Choice screen, touch [Exit]. 4-12 CF1501/CF2001...
Press down on the paper-lifting plate until it locks into place. Remove the trailing-edge guide, and then re-install it for the size of paper to be loaded. Slide the lateral guides to fit the size of paper to be loaded. CF1501/CF2001 4-13...
Page 72
Slide the lateral guides against the edges of the paper. Make sure that the paper is not curled when it is loaded. Check that the lateral guides are pushed up against the edges of the paper. Close the paper drawer. 4-14 CF1501/CF2001...
§ Feed only one sheet of paper at a time. § Copies will be made on the surface of the paper facing down when it is loaded into the manual bypass tray. CF1501/CF2001 4-17...
Page 76
When loading a postcard, load it as shown. § Do not load the postcard cross- wise, as shown. Is the recommended overhead projector transparency (MINOLTA CF300 (D)) loaded? § When loading the recommend- ed overhead projector transpar- ency (MINOLTA CF300 (D)), load it as shown in the illustra- tion.
Page 77
Do you wish to specify a non-standard paper size? § Touch , and to select the desired size, and then touch [Enter]. Touch [Paper Type], select the set- ting for the type of paper loaded, and then touch [Enter]. CF1501/CF2001 4-19...
This method is best with books and other docu- ments that cannot be fed through the duplexing document feeder. See p. 5-11, p. 5-12, p. 5-13, p. 5-14. CF1501/CF2001...
Standard size documents larger than 11 × 17L or smaller than 5-1/2 × 8-1/2 Documents that are transparent or translucent, such as overhead transparencies or diazo photosensitive paper Wrinkled, folded, rolled, or torn documents Documents bound with clips or staples Coated documents such as carbon-backed paper CF1501/CF2001...
Scan without closing the original cover or duplexing document feeder. In addition, do not press down extremely hard on the document, oth- erwise the copier may be damaged. (The original glass can only resist a weight of up to 4-1/2 lbs.) CF1501/CF2001...
Be sure to adjust the paper guide to the size of the document, other- wise the documents may not be fed in straight. Slide the adjustable document guide to fit the size of the documents. Load the documents face up into the document feed tray. CF1501/CF2001...
Multi-Sheet Feeding (Documents of Mixed Sizes) With this feature, a stack of documents of different sizes can be copied as a set using the duplexing document feeder. (For more details, refer to “Feeding Documents of Different Sizes (“Mixed Orig Detection” Function)” on page 7-17.) CF1501/CF2001...
Slide the adjustable document guide to the edge of the largest document Press the [Start] key to start feeding and copying the documents from the top page. CF1501/CF2001...
Zoom setting and the number of copies). Do you need more information about the settings? § Refer to “6 Basic Operations” and “7 Advanced Operations”. Open the single-sheet feed tray, and then slide the adjustable document guide to fit the size of the document. CF1501/CF2001...
Page 86
Insert the document pages one at a time. § Be sure the documents are not folded or curled when they are fed. Make sure the indicator on the [Start] key lights up in green before feeding the next page of the document. CF1501/CF2001...
(such as the zoom ratio and the number of copies). For more details, refer to “6 Basic Operations” and “7 Advanced Opera- tions”. Continue with steps 2 through 4 of “Single-Sheet Feeding (Standard Paper/Thick Paper)” on page 5-7. CF1501/CF2001...
Lift open the original cover, or the duplexing document feeder if it is in- stalled, 15° or more, otherwise the document size will not be detected and the correct paper size or zoom ratio may not be selected automat- ically. 15° 5-10 CF1501/CF2001...
Close the original cover, or the duplexing document feeder if it is in- stalled. Select the desired settings. Do you need more information about the settings? § Refer to “6 Basic Operations” and “7 Advanced Operations”. Press the [Start] key to copy the document. CF1501/CF2001 5-11...
Place a blank sheet of paper of the same size as the document over the document. Close the original cover, or the duplexing document feeder if it is in- stalled. 5-12 CF1501/CF2001...
Close the original cover, or the duplexing document feeder if it is in- stalled. Is a thick book or object being copied? § Make the copy without closing the original cover or duplexing doc- ument feeder. CF1501/CF2001 5-13...
“12-1/4 × 18” mark on the top doc- ument width scale as shown in the il- lustration. Close the original cover, or the duplexing document feeder if it is in- stalled. 5-14 CF1501/CF2001...
Page 93
Original Documents Select the desired settings. Do you need more information about the settings? § Refer to “6 Basic Operations” and “7 Advanced Operations”. Press the [Start] key to copy the document. CF1501/CF2001 5-15...
Type set to “Text&Photo”, Zoom set to “×1.000”, Paper set to “Auto Pa- per”, and the number of copies set to “1”. Press the [Copy] key to enter Copy mode. Position the document(s) to be cop- ied. (Refer to page 5-1 for more de- tails.) CF1501/CF2001...
Page 96
Does the wrong number of cop- ies appear? § Press the [C] (clear) key, and then enter the correct number of copies. § The number of copies can only be set to a number between 1 and 100. CF1501/CF2001...
Page 97
Basic Operations Press the [Start] key. The set number of copies are made. Do you wish to stop copying be- fore the set number of copies are made? § Press the [Stop] key. CF1501/CF2001...
Zoom (Refer to page 6-14 for more details.) Original Image Type (Refer to page page 6-18 for more details.) Density (Refer to page 6-20 for more details.) Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. CF1501/CF2001...
Paper types: Standard paper (thickness: 17 to 24 lbs.) Thick paper 1 (thickness: 24-1/4 to 43-1/4 lbs.) Overhead projector transparencies Second side of a double-sided copy on standard paper Second side of a double-sided copy on thick paper 1 CF1501/CF2001...
Zoom (Refer to page 6-14 for more details.) Original Image Type (Refer to page 6-18 for more details.) Density (Refer to page 6-20 for more details.) Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. CF1501/CF2001...
Minimum size: 3-9/16 × 5-1/2 in. (90 × 140 mm) To feed the paper manually Position the document(s) to be copied. (Refer to page 5-1 for more de- tails.) Select the desired color mode. (Refer to page 3-20 for more details.) Open the manual bypass tray. CF1501/CF2001...
Page 102
Has paper not been loaded into the manual bypass tray yet? § Copies can also be made by loading paper into the manual bypass tray after selecting the paper size by touching [Paper] in the Basic screen, then touching [Bypass]. CF1501/CF2001...
Position the document(s) to be copied. (Refer to page 5-1 for more de- tails.) Select the desired color mode. (Refer to page 3-20 for more details.) Open the manual bypass tray. CF1501/CF2001...
Page 104
(MI- NOLTA CF300 (D)) being used? § When using the recommended overhead projector transparencies (MINOLTA CF300 (D)), load them as described on page 4-17. Make sure that the screen that al- lows you to select the manual by-...
[4 × 6]. The “Paper Type” setting automati- cally changes to “Thick Paper 2”. (* Setting the paper size for the manual bypass tray to “4 × 6” auto- matically changes the “Paper Type” setting to “Thick Paper 2”.) CF1501/CF2001 6-11...
Make sure that the screen that al- lows you to select the manual by- pass tray paper size is displayed, check that the desired paper size is selected, and then touch [Paper Type]. 6-12 CF1501/CF2001...
Page 107
[Enter]. Specify any other necessary settings. Zoom (Refer to page 6-14 for more details.) Original Image Type (Refer to page 6-18 for more details.) Density (Refer to page 6-20 for more details.) Press the [Start] key. CF1501/CF2001 6-13...
0.001 increments. Keep touching the arrow to change the zoom ratio more quickly. Full Size: This setting makes a copy the same size as the document (×1.000). CustomZoom: With this setting, the keypad can be used to enter a zoom ratio. 6-14 CF1501/CF2001...
Paper (Refer to page 6-4 for more details.) Original Image Type (Refer to page 6-18 for more details.) Density (Refer to page 6-20 for more details.) Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. CF1501/CF2001 6-15...
Do you know what is the range for the “Minimal” zoom ratio? § The zoom ratio of the “Minimal” setting can be set between × 0.900 and × 0.999. Touch [Enter]. 6-16 CF1501/CF2001...
The recorded zoom ratios can be recalled whenever they are needed. In the screen that allows you to select the zoom ratio, touch [CustomZoom]. Touch the zoom ratio that you wish to recall (“1”, “2” or “Minimal”). Touch [Enter]. CF1501/CF2001 6-17...
If moiré effects should occur in copies containing lines or shading, re- duce their effects by selecting the appropriate setting. “Gradation” is the default setting; however, “Resolution” is also available. These settings are only available if “Text&Photo”, “Photo Image” or “Printed Image” are selected. 6-18 CF1501/CF2001...
Paper (Refer to page 6-4 for more details.) Zoom (Refer to page 6-14 for more details.) Density (Refer to page 6-20 for more details.) Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. CF1501/CF2001 6-19...
Position the document(s) to be copied. (Refer to page 5-1 for more de- tails.) Select the desired color mode. (Refer to page 3-20 for more details.) Make sure that the Basic screen is displayed, and then touch [Original/ Density]. 6-20 CF1501/CF2001...
Page 115
Paper (Refer to page 6-4 for more details.) Zoom (Refer to page 6-14 for more details.) Original Image Type (Refer to page 6-18 for more details.) Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. CF1501/CF2001 6-21...
When the [Interrupt] key is pressed, all functions and settings are reset to their defaults. Using the keypad, enter the number of copies you wish to make, and then press the [Start] key to copy the other document. 6-22 CF1501/CF2001...
Page 117
After the other document is copied, press the [Interrupt] key. The indicator on the [Interrupt] key goes off. Reposition the document for the interrupted copy job that was re- moved in step 2. Press the [Start] key. The interrupted copy job continues. CF1501/CF2001 6-23...
Single-Sided Ö Ö Ö Ö Single–2in1: Important) This setting is only available if both the duplexing document feeder (AFR-16) and the memory (M128-2) are installed. § This setting makes a single-sided copy of two pages side-by-side from two single-sided documents. CF1501/CF2001...
(AFR-16) and the memory (M128-2) are all installed. § This setting makes a double-sided copy from a double-sided docu- ment. Book (Separation) Ö Ö Ö Ö Single-Sided: § This setting makes a single-sided copy of each of the two pages of an open book. CF1501/CF2001...
Book (either Standard Book or RightBound) Ö Ö Ö Ö Book Erase: § This setting erases the area around the text (frame erase) or the bind- ing of the book (center erase) so that it does not appear in the copy. CF1501/CF2001...
10-45.) Since copy quality will decrease when Compress Mode is changed, the setting should normally not be changed. Specify any other necessary settings. Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. CF1501/CF2001...
(center erase) so that it does not appear in the copy, touch [Book Erase]. The Book Erase screen appears. Is frame erasing and center erasing unnecessary? § If frame erasing and center erasing are unnecessary, skip to step CF1501/CF2001...
Page 124
§ If the size of the document is not to be specified, skip to step 12. In the Original Size screen, touch , and to spec- ify the desired size, and then touch [Enter]. The Book Erase screen reappears. CF1501/CF2001...
Page 125
In the Book screen, touch [Enter]. Specify any other necessary settings. Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. CF1501/CF2001...
Sort: Important) When used as a copier, the 10-mailbin sorter (JS-1002) must be in- stalled. § The copies are automatically divid- ed into sets with each set containing a copy of each page. CF1501/CF2001...
When used as a copier, the 10-mailbin sorter (JS-1002) must be in- stalled. § The copies are automatically divid- ed into stacks containing copies of the same page. Note The orientation in which the copies are fed out depends on the select- ed settings. CF1501/CF2001...
10-mailbin sorter (JS-1002) is installed. If the finisher is installed, [Sort] and [Group] do not appear. Specify any other necessary settings. Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. CF1501/CF2001 7-11...
2-Point stapling (only with finisher FN-107 installed): The printed pages, positioned ac- cording to the specified paper orien- tation, are bound with two staples at the center, parallel to the edge of the pages. 7-12 CF1501/CF2001...
*Only with finisher FN-107 installed 11 × 14L, 11 × 17L Printed image: Landscape; Paper orientation: Crosswise LetterC, ExecutiveC Possible paper sizes: LetterC, Ex- ecutiveC Possible paper types: Standard pa- per (FN-107: 17 to 24 lbs.) *Only with finisher FN-107 installed CF1501/CF2001 7-13...
Page 132
Possible paper sizes: LetterC, Ex- ecutiveC, 11 × 14L, 11 × 17L Possible paper types: Standard paper (17 to 24 lbs.) LetterC, ExecutiveC For more details on selecting the stapling settings, refer to the manual for the printer controller. 7-14 CF1501/CF2001...
(17 to 24 lbs.) Punched hole position: The position of the punched hole differs according to the printed image and paper orientation. Possible paper sizes: LetterL, LetterC, LegalL, 11 × 17L 11 × 17L LetterL LegalL LetterC CF1501/CF2001 7-15...
Page 134
Advanced Operations Possible paper sizes: LetterL, LetterC, LegalL, 11 × 14L, 11 × 17L 11 × 14L, 11 × 17L LetterL LegalL LetterC For more details on selecting the “Hole-Punch” setting, refer to the manual for the printer controller. 7-16 CF1501/CF2001...
Select the desired color mode. (Refer to page 3-20 for more detail.) CF1501/CF2001 7-17...
Page 136
Specify any other necessary settings. Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. 7-18 CF1501/CF2001...
× 0.5 when selecting this setting while making enlarged or reduced copies. Example) When using the 1/2 in. 1/4 in. “Frame Erase” function while copying an 11 × 17-size docu- ment with a zoom ratio of “× 0.500” CF1501/CF2001 7-19...
Page 138
[Enter]. In the Frame Erase screen, touch [Enter]. Specify any other necessary settings. Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. 7-20 CF1501/CF2001...
(otherwise, skip to step 8): To specify the document size, touch [Original Size]. In the Original Size screen, touch , and specify the desired size, and then touch [Enter]. CF1501/CF2001 7-21...
Page 140
Advanced Operations In the Mirror Image screen, touch [Enter]. Specify any other necessary settings. Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. 7-22 CF1501/CF2001...
Position the document(s) to be copied. (Refer to page 5-1 for more de- tail.) Select the desired color mode. (Refer to page 3-20 for more detail.) Touch [Auxiliary]. The Auxiliary screen appears. Touch [Color Adjustment]. Touch the parameter that you wish to change. CF1501/CF2001 7-23...
The paper for the test print is automatically selected in the following or- der: A4C, LetterC, A3L, 11 ×17L. While referring to the test prints, touch the arrows to select the desired setting for the current parameter, and then touch [Enter]. Correctly position the document for normal printing. 7-24 CF1501/CF2001...
[Hue]. Touch the arrows to select the de- sired setting, and then touch [Enter]. To adjust the saturation This parameter can be used to adjust the vividness of the colors. In the Color Adjustments screen, touch [Saturation]. CF1501/CF2001 7-25...
[Enter]. To adjust the brightness This parameter can be used to adjust the brightness of the image. In the Color Adjustments screen, touch [Brightness]. Touch the arrows to select the desired setting, and then touch [Enter]. 7-26 CF1501/CF2001...
[Sharpness]. Touch the arrows to select the de- sired setting, and then touch [Enter]. To adjust the contrast This parameter can be used to make an image either lighter or darker. In the Color Adjustments screen, touch [Contrast]. CF1501/CF2001 7-27...
Change the color balance of the image by adjusting the concentration of each color (cyan, magenta, yellow and black). In the Color Adjustments screen, touch [Color Balance]. Select the color that you wish to ad- just, touch to specify the desired setting, and then touch [Enter]. 7-28 CF1501/CF2001...
To adjust the density This parameter can be used to make an image either more rich or more pale. In the Color Adjustments screen, touch [Density]. Touch the arrows to select the de- sired setting, and then touch [Enter]. CF1501/CF2001 7-29...
Load the overhead transparencies into the 1st drawer, and then set the media type selection dial on the drawer to “OHP”. Select the desired color mode. (Refer to page 3-20 for more detail.) Touch [Auxiliary]. The Auxiliary screen appears. Touch [OHP Interleaving]. 7-30 CF1501/CF2001...
Page 149
Advanced Operations Select the drawer loaded with the interleaves, and then touch [Enter]. Specify any other necessary settings. Press the [Start] key. CF1501/CF2001 7-31...
Touch [X] or [Y], and use the keypad to enter the desired zoom ratio, and then touch [Enter]. Specify any other necessary settings. Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. 7-32 CF1501/CF2001...
To set the “Postcard” function Position the document(s) to be copied. (Refer to page 5-1 for more details.) Select the desired color mode. (Refer to page 3-20 for more details.) Touch [Auxiliary]. The Auxiliary screen appears. Touch [Postcard]. Touch [Original Size]. CF1501/CF2001 7-33...
Page 152
Using the keypad, enter the number of copies you wish to make, and then press the [Start] key. Note To purchase postcard paper, contact the sales representative for this copier. 7-34 CF1501/CF2001...
Select the desired color mode. (Refer to page 3-20 for more details.) Touch [Auxiliary]. The Auxiliary screen appears. Touch [Image Repeat]. Make sure that [Zoom] is selected, and then use the keypad to enter the desired zoom ratio. CF1501/CF2001 7-35...
Page 154
[Enter]. The appropriate size of loaded paper for the set zoom ratio, number of copies, and document size is selected. Check the selected paper size, and then touch [Enter]. 7-36 CF1501/CF2001...
Page 155
Advanced Operations To manually select the paper source, touch [Paper Size]. Select the tray or drawer containing the paper that you wish to use, and then touch [Enter]. Press the [Start] key. CF1501/CF2001 7-37...
Press the [Utility] key to enter Utility mode. Touch [Default Settings]. Select the desired setting, and then touch [Enter]. Do you wish to record the cur- rent settings as the default set- tings? § Touch [Current Settings]. In the Utility screen, touch [Exit]. CF1501/CF2001...
Number of copies/printouts made on paper registered as large-size paper Duplex Copy: Number of double-sided copies made using the duplex unit Duplex Print: Number of double-sided computer printouts made using the duplex unit G. Total (C+P): Total number of all pages copied or printed CF1501/CF2001...
Do you wish to print out the meter counts? § As described by the instructions that are displayed, load paper (Letter ) into the first paper drawer, and then press the [Start] key. When you are finished viewing the meter counts, touch [Exit]. CF1501/CF2001...
To store a job First, specify the copy settings that you will store as a job. Press the [Utility] key to enter Utility mode. Touch [Job Memory Input]. Touch [Input], and then touch the number where you wish to store the job. CF1501/CF2001...
Check that the name for the select- ed job is typed correctly, and then touch [Exit]. To delete a job Press the [Utility] key to enter Utility mode. Touch [Job Memory Input]. CF1501/CF2001...
After the entered job name is erased to indicate that the job was delet- ed, touch [Exit]. To recall a stored job Press the [Copy] key to enter Copy mode. Press the [Job Recall] key. Touch the number of the job that you wish to recall. CF1501/CF2001...
Page 163
Do you wish to select a different job instead? § Touch [Next]. Position the document(s) to be copied. Do you need more information on feeding the document? § Refer to “5 Original Documents” on page 5-1 for more details. Press the [Start] key. CF1501/CF2001...
[Panel Reset] key is pressed. To change the User’s Choice settings Press the [Utility] key to enter Utility mode. Touch [User’s Choice]. Touch the parameter that you wish to change CF1501/CF2001...
This parameter can be used to change the language of the touch panel. The default setting is “English”. In the User’s Choice screen, touch [Language selected]. Select the desired language, and then touch [Enter]. In the User’s Choice screen, touch [Exit]. CF1501/CF2001...
2in1 copy mode is chosen. The default set- ting is “ON”. In the User’s Choice screen, touch [2in1copy zoom]. Select whether the recommended zoom ratio will be used (“ON”) or not (“OFF”), and then touch [Enter]. In the User’s Choice screen, touch [Exit]. 8-10 CF1501/CF2001...
The “Sort” setting is only available if the optional 10-mailbin sorter (JS- 1002) is installed. In the User’s Choice screen, touch [Intelligent Sorting]. Select whether intelligent sorting will be used (“ON”) or not (“OFF”), and then touch [Enter]. In the User’s Choice screen, touch [Exit]. CF1501/CF2001 8-11...
The default setting is “3 (Std.)”. In the User’s Choice screen, touch [ACS Determination level Adjust.]. Touch [Black] or [Full Color] to specify the standard detection level, and then touch [Enter]. In the User’s Choice screen, touch [Exit]. 8-12 CF1501/CF2001...
The default setting is “ON”. In the User’s Choice screen, touch [Confirmation Beep]. Select whether the confirmation beep is sounded (“ON”) or not (“OFF”), and then touch [Enter]. In the User’s Choice screen, touch [Exit]. CF1501/CF2001 8-13...
When setting the bins to be used as mailbins, how many bins can be selected? § Bins specified as mailbins cannot be used for sorting when making copies. For the example mentioned above, bins 1 through 4 can be used for sorting while making copies. 8-14 CF1501/CF2001...
Do you wish to change the num- ber of minutes entered? § Press the [C] (clear) key to erase the entered number, and then use the keypad to enter the correct number of minutes. In the User’s Choice screen, touch [Exit]. CF1501/CF2001 8-15...
Do you wish to change the num- ber of minutes entered? § Press the [C] (clear) key to erase the entered number, and then use the keypad to enter the correct number of minutes. In the User’s Choice screen, touch [Exit]. 8-16 CF1501/CF2001...
Do you wish to change the num- ber of minutes entered? § Press the [C] (clear) key to erase the entered number, and then use the keypad to enter the correct number of minutes. In the User’s Choice screen, touch [Exit]. CF1501/CF2001 8-17...
To select the paper size manually, touch [Input Size], select the de- sired paper size, and then touch [Enter]. To specify a paper size other than those listed, touch [Custom Size], touch , and to specify the desired size, and then touch [Enter]. 8-18 CF1501/CF2001...
Page 175
Utility Mode Operations In the Input Size screen, touch [Enter]. In the 1st Drawer Paper Size screen, touch [Enter]. In the User’s Choice screen, touch [Exit]. CF1501/CF2001 8-19...
Be sure to write down this number and store it in a safe place. If the administrator access code has been change, be sure to notify the appropriate service representative. To change the Administrator Mode settings Press the [Utility] key to enter Utility mode. Touch [Administrator Mode]. CF1501/CF2001...
Page 178
Administrator Mode Operations Using the keypad, enter the four- digit administrator access code. Touch [Copy Track]. The Copy Track screen appears. Touch [ON], and then touch the pa- rameter that you wish to change. CF1501/CF2001...
Press the [C] (clear) key to erase the entered access code. Has registration of the entered access code been cancelled? § If the entered access code is the same as one that has already been registered, registration is cancelled. Try again using a differ- ent access code. CF1501/CF2001...
Important) A maximum of 99 account numbers can be registered at one time. Ad- ditional accounts cannot be added. In the Copy Track screen, touch [ON], and then touch [Access # In- put]. The Access # Input screen appears. CF1501/CF2001...
Page 181
The same account number cannot be registered more than once. § If a previously registered account number is registered again, the previous one is deleted. Touch [Enter] in the Copy Track screen. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. CF1501/CF2001...
In the Copy Track screen, touch [OFF]. The All Accounts Data Reset screen appears. Touch [Yes], and then touch [Enter] to reset the data for all accounts. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. CF1501/CF2001...
[Start] key again to print the counter ta- ble. In the Counter Status screen, touch [Enter]. In the Copy Track screen, touch [Enter]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. CF1501/CF2001...
Do you wish to reset the counters for all accounts regis- tered? § Touch [All Accts.]. Touch [Yes], and then touch [Enter]. To reset the counters for other ac- counts, repeat steps 2 and 3. In the Counter Reset screen, touch [Enter]. CF1501/CF2001...
Touch to select the account whose copies you wish to limit. Select whether color copying and black-and-white copying are al- lowed (“Allow”) or not (“Prohibit”). To limit the copies for other ac- counts, repeat steps 2 and 3. CF1501/CF2001...
Page 186
Administrator Mode Operations In the Permission Level screen, touch [Enter]. In the Copy Track screen, touch [Enter]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. 9-10 CF1501/CF2001...
2 through 4. Do you wish to change the num- ber entered? § Press the [C] (clear) key to erase the entered number, and then use the keypad to enter the correct number. CF1501/CF2001 9-11...
Page 188
Administrator Mode Operations In the Account Copy Limitations screen, touch [Enter]. In the Copy Track screen, touch [Enter]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. 9-12 CF1501/CF2001...
If the gradation levels are adjusted, the “Card and Transparency Im- age Density” parameter of the Expert User’s Mode must be reset. To adjust the gradation levels Press the [Utility] key to enter Utility mode. Touch [Administrator Mode]. Using the keypad, enter the four- digit administrator access code. CF1501/CF2001 9-13...
Page 190
Close the original cover, and then press the [Start] key to begin adjust- ing the gradation. When the color gradation has been adjusted, the Administrator Mode screen appears. Repeat steps 5 through 8 three times. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. 9-14 CF1501/CF2001...
Setting this function to “Yes” turns off the Sleep function. The default set- ting is “No”. To turn off the Sleep function Press the [Utility] key to enter Utility mode. Touch [Administrator Mode]. Using the keypad, enter the four- digit administrator access code. CF1501/CF2001 9-15...
Page 192
Administrator Mode Operations Touch [Disable Sleep Mode]. The Disable Sleep Mode screen ap- pears. Touch [Yes], and then touch [Enter]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [User’s Choice]. 9-16 CF1501/CF2001...
Page 193
If the time in the Sleep Mode screen (displayed by pressing the [Utility] key, touching [User’s Choice], then touching [Sleep Mode]) is set, the Sleep function will again be enabled. For more details, refer to “To set the “Sleep Mode” parameter” on page 8-17 . CF1501/CF2001 9-17...
5 mm (0.2 in.). To set the “Erase” function Note) Discuss any changes to this function with your service representative. Press the [Utility] key to enter Utility mode. Touch [Administrator Mode]. Using the keypad, enter the four- digit administrator access code. 9-18 CF1501/CF2001...
Page 195
Administrator Mode Operations Touch [2/2], and then touch [Erase]. The Tip Erase screen appears. Select the desired setting, and then touch [Enter]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. CF1501/CF2001 9-19...
Discuss any changes to the Expert User’s Mode settings with your technical representative. To change the Expert User’s Mode settings Note) Discuss any changes to this function with your service representative. Press the [Utility] key to enter Utility mode. Touch [Administrator Mode]. 9-20 CF1501/CF2001...
Page 197
Administrator Mode Operations Using the keypad, enter the four-digit administrator access code. Touch [2/2], and then touch [Expert User’s Mode]. The Expert User’s Mode screen ap- pears. Touch the parameter that you wish to change. CF1501/CF2001 9-21...
(cyan, magenta, yellow and black), and then touch [Enter]. In the Expert User’s Mode screen, touch [Exit]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. 9-22 CF1501/CF2001...
[Enter]. If there is a shift, touch to specify the desired adjustment for “θ”, and then repeat steps 2 and 3 until there no longer is a shift. CF1501/CF2001 9-23...
Page 200
[Enter]. The example below shows the adjustment for cyan; however, the other colors should be adjusted in the same way. If the lines are shifted in the X- direction: Touch [X], and then align on the black grid. 9-24 CF1501/CF2001...
Page 201
Touch [θ], and then align the A2 shift on the A1 shift. If necessary, touch [X], and then make the necessary adjustment. In the Expert User’s Mode screen, touch [Exit]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. CF1501/CF2001 9-25...
In the Expert User’s Mode screen, touch [Exit]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. Copy a document, and then compare the copy to the original docu- ment. Check that the copy is correct. 9-26 CF1501/CF2001...
Load paper (11 × 17L) into the 1st drawer, and then press the [Start] key to print out the test pattern. The screen at the right is displayed if the paper type dial on the 1st drawer is set for normal paper. CF1501/CF2001 9-27...
Page 204
(1st drawer), change the paper type dial to the appropriate paper setting, and then perform step 2. In the Expert User’s Mode screen, touch [Exit]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. 9-28 CF1501/CF2001...
Load paper (11 × 17L) into the third paper drawer. In the Expert User’s Mode screen, touch [2/2], and then touch [PRT Area (Left Margin)]. The Left Margin screen appears. Touch [3rd Drawer], and then press the [Start] key to print out the test pattern. CF1501/CF2001 9-29...
Page 206
In the Expert User’s Mode screen, touch [Exit]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. 9-30 CF1501/CF2001...
In the Expert User’s Mode screen, touch [2/2], and then touch [PRT Area (Dup. Left Margin)]. The Dup. Left Margin screen ap- pears. Touch [4th Drawer], and then press the [Start] key to print out the test pattern. CF1501/CF2001 9-31...
Page 208
3.0 mm ± 1.0 mm In the Expert User’s Mode screen, touch [Exit]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. 9-32 CF1501/CF2001...
[2/2], and then touch [Thin Orig.]. The Thin Orig. screen appears. Touch [ON], and then touch [Enter]. In the Expert User’s Mode screen, touch [Exit]. In the Administrator Mode screen, touch [Exit]. In the Utility screen, touch [Exit]. Touch [Orig. Ö Copy]. CF1501/CF2001 9-33...
Touch [Thin Orig.]. Specify any other necessary settings. Registering Scan Save Locations (“Scanner Addr. Input” Function) This function can be used when the printer controller is connected. For more details, refer to the manual for the printer controller. 9-34 CF1501/CF2001...
Follow the procedure below to load more paper. Loading paper into the 1st drawer (250-sheet multipurpose paper drawer) --> page 10-2 into the 500-sheet paper feed unit --> page 10-3 into the large-capacity cabinet --> page 10-5 CF1501/CF2001 10-1...
Make sure to align the stack of paper. Do you wish to load a paper size or type different from that previ- ously loaded? § For more details on changing the paper size and type, refer to “Loading Paper” on page 4-7. 10-2 CF1501/CF2001...
Be careful not to touch the sur- face of the paper take-up roller with your hands. If the roller has been touched, wipe it with a dry cloth. Press down on the paper-lifting plate until it locks into place. CF1501/CF2001 10-3...
Page 214
Slide the lateral guides against the edges of the paper. Make sure that the paper is not curled when it is loaded. Check that the lateral guides are pushed up against the edges of the paper. Close the paper drawer. 10-4 CF1501/CF2001...
Have you loaded too much pa- per into the drawer? § Do not load so much paper that the top of the stack is higher than the Ä mark. Close the paper drawer. CF1501/CF2001 10-5...
Do not refill the toner until the message indicating that the toner be re- filled appears on the touch panel. In addition, do not refill the toner of any color other than the one indicated in the message on the touch panel. 10-6 CF1501/CF2001...
Page 217
Do not throw away the used toner bottle; instead, keep it to be collect- ed by your technical representative. WARNING Precautions for handling toner and the toner bottle: § Do not throw toner or the toner bottle into a fire. Toner expelled from the fire may cause burns. CF1501/CF2001 10-7...
Is the toner within the bottle hard? § The toner within the bottle may become compacted. If it does, be sure to shake the bottle until the toner is mostly broken up be- fore adding it to the hopper. 10-8 CF1501/CF2001...
Page 219
Do you know what precautions should be taken when refilling the toner? § Do not tap on the toner bottle while refilling the hopper; otherwise, the toner may spurt out. Push the toner hopper shutter closed. CF1501/CF2001 10-9...
Page 220
Touch Panel Messages Tilt the toner bottle backward, and then pull the opening of the bottle up and toward you to remove it. Close the toner hopper lid, and then close the toner supply door. 10-10 CF1501/CF2001...
When finisher FN-107 or FN-108 is installed and is about to run out of sta- ples, the message shown below appears. Follow the procedure below to replace the staple cartridge. To replace the staple cartridge Slide the finisher away from the copier. If finisher FN-107 is installed, open right-side door FN7. CF1501/CF2001 10-11...
Page 222
Stapler 1 Stapler 2 Finisher FN-108 Stapler 1 Since finisher FN-107 is equipped with two staple holders, which staple holder should be pulled out? § The message on the touch panel indicates which staple holder should be pulled out. 10-12 CF1501/CF2001...
Page 223
(Finisher FN-107) Remove the empty staple cartridge from the staple holder. (Finisher FN-107) Insert the new staple cartridge into the staple holder, and then carefully remove the stopper. (Finisher FN-108) Remove the empty staple cartridge from the staple holder. CF1501/CF2001 10-13...
Page 224
Insert the new staple cartridge into the staple holder, and then carefully remove the stopper. Insert the refilled staple holder until it locks into place. Finisher FN-107 Finisher FN-108 If finisher FN-107 is installed, close right-side door FN7. 10-14 CF1501/CF2001...
Page 225
Touch Panel Messages Slide the finisher back against the copier. Note Be sure to replace the staple cartridge only after this message ap- pears. Injuries may occur if the staple cartridge is removed before the message appears. CF1501/CF2001 10-15...
A flashing “2” indicates the location of the paper misfeed. In addition, a lit “2” indicates areas where paper may have been misfed and that should be checked. 10-16 CF1501/CF2001...
Page 227
10-mailbin sorter/ Duplex unit Finisher p. 10-34 p. 10-21 Manual bypass tray p. 10-19 Copier p. 10-24 Paper drawers p. 10-22 Copier p. 10-24 Paper feed unit p. 10-22 Duplex unit p. 10-21 Manual bypass tray p. 10-19 CF1501/CF2001 10-17...
Page 228
Touch Panel Messages Duplexing document feeder p. 10-28 Finisher FN-107/FN-108 p. 10-30 10-mailbin sorter p. 10-34 10-18 CF1501/CF2001...
§ Be careful not to touch the surface of the image transfer belt at the bot- tom of the copier’s fusing unit. Pull up the lock release lever to open the right-side door. CF1501/CF2001 10-19...
Page 230
Touch Panel Messages Carefully pull out the paper. Close the right-side door. 10-20 CF1501/CF2001...
Touch Panel Messages Paper Misfeed in the Duplex Unit To clear a paper misfeed in the duplex unit Open the duplex unit door. Carefully pull out the paper. Close the duplex unit door. CF1501/CF2001 10-21...
Paper Misfeed in the Paper Feed Unit To clear a paper misfeed in the paper feed unit Open the lower right-side door. Turn the green wheels to feed the paper so that it can be easily re- moved. 10-22 CF1501/CF2001...
Page 233
Has the paper take-up roller been touched? § Be careful not to touch the sur- face of the paper take-up roller with your hands. If the roller has been touched, wipe it with a dry Paper take-up roller cloth. CF1501/CF2001 10-23...
The area around the fusing unit is extremely hot. § Touching anything other than the paper within the area around the fus- ing unit may result in burns. § If you get burnt, immediately cool the skin under cold water, and then seek professional medical advice. 10-24 CF1501/CF2001...
Page 235
While moving the green lever on the inside of the upper right-side door in the direction of the arrow, carefully pull out the paper. Carefully pull out the paper. CF1501/CF2001 10-25...
Page 236
While holding the levers on the ends of the oil-coating unit, move the unit back to its original position. Fully move the two lock release le- vers for the oil-coating unit in the di- rection of the arrows. 10-26 CF1501/CF2001...
Page 237
The area around the fusing unit is extremely hot. § Touching anything other than the indicated levers around the fusing unit may result in burns. § If you get burnt, immediately cool the skin under cold water, and then seek professional medical advice. CF1501/CF2001 10-27...
To clear a paper misfeed in the duplexing document feeder Open misfeed clearing cover F1. Remove all documents from the document feed tray, and then care- fully pull out any other documents. Open misfeed clearing cover F2, and then carefully pull out any doc- uments. 10-28 CF1501/CF2001...
Page 239
Remove any documents on the original glass, and then close the duplexing document feeder. Close misfeed clearing covers F1 and F2. Reload the documents according to the instructions that appear on the touch panel. CF1501/CF2001 10-29...
Note Be careful about a protrusion on the backside of the horizontal transport unit cover. It can hurt you! (Part indicated in Step3.) To clear a paper misfeed in finisher FN-107/FN-108 Slide the finisher away from the copier. 10-30 CF1501/CF2001...
Page 241
Touch Panel Messages Open the cover of the horizontal transport unit. Remove any paper, and then close the cover of the horizontal transport unit. If finisher FN-107 is installed, open right-side door FN7. CF1501/CF2001 10-31...
Page 242
FN7 (for finisher FN-108), re- move any paper. If finisher FN-107 is installed, close right-side door FN7. Open front door FN4. Turn knobs FN5 at the same time to feed out any paper. Close front door FN4. Open upper cover FN1. 10-32 CF1501/CF2001...
Page 243
While holding misfeed clearing guide FN2 open, remove any paper While holding misfeed clearing guide FN3 open, remove any paper. Close upper cover FN1. While holding misfeed clearing guide FN6 open, remove any paper. Slide the finisher back against the copier. CF1501/CF2001 10-33...
Be careful about a protrusion on the backside of the horizontal transport unit cover. It can hurt you! (Part indicated in Step 4.) To clear a paper misfeed in the 10-mailbin sorter Slide the 10-mailbin sorter away from the copier. Remove any paper from the mail- bins. 10-34 CF1501/CF2001...
Page 245
Touch Panel Messages Open the cover of the horizontal transport unit. Remove any paper, and then close the cover of the horizontal transport unit. Open the upper door and the lower door. CF1501/CF2001 10-35...
Page 246
Touch Panel Messages Remove any paper. Close the upper door and the lower door. Slide the 10-mailbin sorter back against the copier. 10-36 CF1501/CF2001...
When finisher FN-107 or FN-108 is installed and the staples are jammed, the message shown below appears. Follow the procedure below to clear the jammed staples To clear jammed staples Slide the finisher away from the copier. If finisher FN-107 is installed, open right-side door FN7. CF1501/CF2001 10-37...
Page 248
§ The message on the touch pan- el indicates which staple holder should be pulled out. Stapler 1 Push the staple holder guide up, and then pull out one sheet of sta- ples. 10-38 CF1501/CF2001...
Page 249
Touch Panel Messages Move the guide back to its original position. Insert the staple holder until it locks into place. Finisher FN-107 Finisher FN-108 If finisher FN-107 is installed, close right-side door FN7. CF1501/CF2001 10-39...
Page 250
Touch Panel Messages Slide the finisher back against the copier. Are the staples still jammed, even after performing the above procedure? § Contact a qualified technical representative. 10-40 CF1501/CF2001...
When contacting the technical representative, inform them of the num- bers (“P-7” in the example below) listed in the screen that appears. Touching [Exit] in the top-right corner displays the Basic screen. CF1501/CF2001 10-41...
When the message shown below appears in the touch panel, a malfunc- tion has occurred within this copier. If this message appears, contact your technical representative. Note When contacting the technical representative, inform them of the code (“C0400” in the example above) in the screen that appears. 10-42 CF1501/CF2001...
“Need to Replace XXXXX.” appears in the touch panel followed by instructions for replacing the unit. Replace the unit according to the instructions that appear. Disposing of Used Parts Dispose of used units according to your local regulations, or contact your technical representative. CF1501/CF2001 10-43...
Since the maximum amount Remove all copies from the capacity. Please remove all of copies for the indicated fin- indicated tray. pages from -> section tray. isher tray has been exceed- ed, the copier is unable to make copies. 10-44 CF1501/CF2001...
Page 255
If the same message ap- Compress pears again, install the op- Mode. tional memory. Your account has reached its The limit on the number of Contact your administrator. maximum allowance. copies that can be made has p. 9-11 been reached. CF1501/CF2001 10-45...
Refer to p. 5-12. If a thin double-sided docu- Select a darker setting for the ment is being copied, the in- background copy density. formation on the back side Refer to p. 6-20. may be reproduced in the copy. CF1501/CF2001 11-1...
Page 258
The document guides are not Slide the document guides positioned along the edges against the edges of the pa- of the paper. per. Curled paper was loaded into Flatten the paper before the paper drawer. loading it. 11-2 CF1501/CF2001...
3-27. The copier cannot be turned The power supply cord may Plug the power supply cord have been unplugged from into an electrical outlet. the electrical outlet. The room’s circuit breaker is Close the room’s circuit tripped. breaker. CF1501/CF2001 11-3...
Appendix Appendix 12.1 Specifications Copier CF1501/CF2001 Specification CF1501 CF2001 Type Desktop Platen Stationary Photo conductor Copying system Digital Full-Color Copying Developing system NMT(New Micro-toning) system Fusing system Belt-fixing Resolution Scanning: 600 dpi; Printing: 600 dpi × 1800 dpi/256 variations Document •...
Page 262
Appendix Specification CF1501 CF2001 First copy Full color: Less than 15 seconds Black: Less than 12 seconds (in full-size mode using the 1st drawer) Copy speed Full color/Black: Full color/Black: LetterL: 14 sheets/min. LetterL: 14 sheets/min. LetterC: 15 sheets/min. LetterC: 20 sheets/min.
Standard paper (17 to 24 lbs.) Paper sizes 11 × 17L to 5-1/2 × 8-1/2L Power source Supplied from copier Power consumption Less than 17 W Dimensions 5-1/2 in. (width) × 17-1/4 in. (depth) × 14-1/4 in. (height) Weight About 6-3/4 lbs. 12-4 CF1501/CF2001...
Total: 2,000 sheets Power source Supplied from copier Power consumption Less than 32 W Dimensions 21-3/4 in. (width) × 20-1/4 in. (depth) × 34-1/2 in. (height) Weight • Main unit: about 64 lbs. • Horizontal transport unit: 8-3/4 lbs. CF1501/CF2001 12-5...
Holes punching: 2 or 3 holes Power source Supplied from copier Power consumption Less than 63 W Dimensions 21-1/4 in. (width) × 24-3/4 in. (depth) × 38-1/2 in. (height) Weight About 86-1/2 lbs. Accessories 2 staple cartridges (5,000 staples) 12-6 CF1501/CF2001...
• 2 to 20 sheets of densely printed paper Power source Supplied from copier Power consumption Less than 63 W Dimensions 21-1/4 in. (width) × 24-3/4 in. (depth) × 38-1/2 in. (height) Weight About 78-1/4 lbs. Accessories 1 staple cartridge (3,000 staples) CF1501/CF2001 12-7...
Original glass § Clean the original glass by wiping it with a soft, dry cloth. Operation panel § Clean the operation panel by wiping it with a soft, dry cloth. 12-8 CF1501/CF2001...
Clean the newly exposed surface of the belt by wiping it with a soft cloth dampened with a mild household detergent (as in step 1). Repeat the above steps until the entire surface of the document trans- fer belt has been wiped clean. CF1501/CF2001 12-9...
When making “Single-sided ÖDouble-sided” copies while manually placing the documents on the original glass, the copy job cannot be interrupted by pressing the [Interrupt] key. * 1: The “Staple” and “Hole-Punch” settings are only available if both the finisher and printer controller are installed. 12-12 CF1501/CF2001...
216 mm × 279 mm Government Letter 8 in. × 10-1/2 in. 203 mm × 267 mm Quarto 8 in. × 10 in. 203 mm × 254 mm Statement Invoice 5-1/2 in. × 8-1/2 in. 140 mm × 216 mm CF1501/CF2001 12-13...
× 1.733 × 1.224 × 2.000 105mm × 148mm × 1.414 4-1/4 in. × 5-3/4 in. × 1.733 × 1.224 × 0.816 257mm × 364mm × 0.577 10 in. × 14-1/4 in. × 0.707 × 0.500 × 1.154 12-14 CF1501/CF2001...
Page 275
279.4 mm × 355.6 mm Foolscap × 0.772 Letter × 0.772 Invoice × 0.500 Legal Foolscap × 0.928 11 in. × 17 in. Letter × 0.785 215.9 mm × 355.6 mm Invoice × 0.607 11 in. × 17 in. × 1.214 CF1501/CF2001 12-15...
Page 276
× 1.647 139.7 mm × 215.9 mm Legal × 1.545 Foolscap × 1.529 Letter × 1.294 * Zoom ratio = Copy paper size / Document size 1 in. (inch) = 25.4 mm 1 mm = 0.0394 in. (inch) 12-16 CF1501/CF2001...
Auto paper source change feature ............3-27 “Auto Size” zoom setting ..............6-14 Background ..................6-20 Basic operations .................. 6-1 “Book Erase” function ................7-5 Books Copying ..................7-5 Positioning ...................5-13 Cancelling settings ..............3-21 3-25 Care of the copier ................12-8 “Color Adjustment” function ............... 7-23 CF1501/CF2001 13-1...
Page 278
Viewing for the copier ..............8-2 Viewing the meter counts .............. 8-3 Custom zoom setting ................ 6-14 Default settings Changing ..................8-1 List of ................... 3-30 Delayed copy jobs ................3-26 Deleting a stored copy job ..............8-5 13-2 CF1501/CF2001...
Page 279
“Non-Sort” setting ................. 7-10 Selecting ..................7-11 “Sort” setting ................7-10 “Frame Erase” function ..............7-19 Front door ..................3-11 “Full size” zoom setting ..............6-14 Function combination ..............12-10 Fusing unit ..................3-13 Fusing web unit .................3-13 “Gradation Adjust” function ..............9-13 CF1501/CF2001 13-3...
Page 280
Onto paper from the 1st drawer ............ 6-5 Manual bypass tray ................3-11 Manual feeding ................... 6-7 Documents ..........5-1 5-11 5-12 5-13 5-14 Overhead projector transparencies ..........6-9 Paper ..................... 6-7 Postcards ..................6-11 Thick paper .................. 6-12 13-4 CF1501/CF2001...
Page 281
Original Image Type setting ............... 6-18 Overhead projector transparencies ........... 4-4 5-12 Ozone filter ..................3-13 Paper feed unit ..............3-8 3-18 12-3 Paper feeding path ................1-10 Paper misfeed clearing ..............10-16 10-Mailbin sorter ................10-34 Copier ..................10-24 Duplex unit .................10-21 CF1501/CF2001 13-5...
Page 282
Single- or double-sided documents and copies ........7-4 Single-sheet feeding ............5-1 Sleep mode ..................3-26 Disabling ..................9-15 Space requirements ................2-2 Specifications ..................12-1 Staple binding ................... 7-12 Staple position ................7-13 Types of stapling ................. 7-12 Staple cartridge replacement ............10-11 13-6 CF1501/CF2001...
Page 283
“Mail Bin Assignment” parameter ..........8-14 “Sleep Mode” parameter ..............8-17 Utility mode ..................8-1 Waste toner bottle ................3-13 “X/Y Zoom” function ................7-32 Zoom ratio Recalling a recorded zoom ratio ..........6-17 Recording a zoom ratio ..............6-16 Zoom ratio settings ..............6-14 12-13 CF1501/CF2001 13-7...
Page 285
Copyright 2001 MINOLTA CO., LTD. The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. MINOLTA CO., LTD. Image Information Products Marketing Headquarters 3-13, 2-Chome, Azuchi-Machi, Chuo-ku, Osaka 541-8556, Japan...