Minolta CF2002 Service Manual page 177

Admin. Choice
Purpose
To set whether or <Key Counter>(Plug-In Counter)
not the Plug-In • Default setting: Unset
Counter, Data • If "Set" is selected, select the counting method applicable when an
Controller, and
Vendor are


installed.
Mode 1: 1 count per 1 copy cycle
Mode 2: 2 counts per 1 copy cycle
Mode 3: 3 counts per 1 copy cycle
Mode 4: 4 counts per 1 copy cycle
Mode 5: 5 counts per 1 copy cycle


Mode 1: 2 counts per 1 copy cycle
Mode 2: 4 counts per 1 copy cycle
Mode 3: 6 counts per 1 copy cycle
Mode 4: 8 counts per 1 copy cycle
Mode 5: 10 counts per 1 copy cycle


Mode 1: 1 count per 1 copy cycle
Mode 2: 2 counts per 1 copy cycle
Mode 3: 3 counts per 1 copy cycle
Mode 4: 4 counts per 1 copy cycle
Mode 5: 5 counts per 1 copy cycle
<Admin. Unit> (Data Controller)
• Default setting: Unset
<Vendor>
• Default setting: Unset
• If "Set" is selected, select Coin Vendor or Card Keeper.
output is produced in color or mono color.
If "Mode 1" is selected for "Total Counter"
If "Mode 2" is selected for "Total Counter," "Specified sizes" is
selected for "Size Counter," and the paper used is the specified size
If "Mode 2" is selected for "Total Counter," "Sizes other than those
specified" is selected for "Size Counter," and the paper used is the
specified size or one other than those specified
S-44
Setting/Precautions