Replacing The Fusing Unit - Minolta CF2002 Service Manual

(4)

Replacing the Fusing Unit

Removal Procedure
NOTE
• Before replacing the Fusing Unit, ensure that it has had time to cool down.
1. Turn OFF the main switch, then wait for about 20
minutes.
2. Open the Right Door.
4025E018AA
3. Open the Upper Right Door.
NOTE
• When opening the Upper Right Door, be sure to
support it with your hand until it is in the fully open
position. If you remove your hand from the Upper
Right Door, it may drop, and the resulting impact
may cause the hinges to bend.
4025E041AA
4. Hold the handles (at two places) and slide out the
Fusing Unit.
4025E042AB
5. Hold the handles (at two places) and remove the
Fusing Unit.
NOTE
• Please use care while Installing/Removing the
Fusing Unit due to the close proximity of the Fus-
ing Drive Gears.
4025E043AA
E-26