Removal Of The 1St Image Transfer Pressure/Retraction Motor; Removal Of Toner Replenishing Motor C/Bk - Minolta CF2002 Service Manual

(6)

Removal of the 1st Image Transfer Pressure/Retraction Motor

(7)

Removal of Toner Replenishing Motor C/Bk

1. Remove the PWB Box.
D-13 (steps 1 through 10)
 
2. Remove four screws and the Cooling Fan Assy.
4025D060AA
3. Disconnect connectors, terminals, and flat cable.
4. Remove six screws and slide the High Voltage
Unit (Image Transfer, Neutralizing) to the left and
off the copier.
4025D020AA
5. Unplug one connector.
6. Remove two screws and the 1st Image Transfer
Pressure/Retraction Motor.
4004D069AA
1. Remove the Right Front Cover.
2. Unplug one connector.
3. Remove four screws and the Toner Replenishing
Motor C/Bk Assy.
4004D071AB
D-33