Minolta CF2002 Service Manual page 170

Item
To set the maximum and the
minimum width for the width
sensor.
Tray Volume
Upon setup of the ADF
Adjust

To make an automatic adjust-
ment of the sensor.
When a document misfeed


Sensor Auto
occurs.
Adjust
When the sensor is


replaced.
ROM Version
Purpose
To check the ROM version.
When the firmware is upgraded or


PWB is replaced.
Purpose
<Max. Width>
Slide the Document Edge Guides to their
maximum width and press the Start key.
<Min. Width>
Narrow the Document Edge Guides to
their minimum width and press the Start
key.
<Reset And ADF Sensor Auto Adj.>
The detection level of the document
through path sensor is initialized and then
an automatic adjustment is made.
<ADF Sensor Auto Adj.>
The detection level of the document
through path sensor is automatically
adjusted.
<1>
MSC/PANEL
MSC Subset
Message
Mecha/PIC
IR
I.P
ADF
Sorter/Finisher
<2>
Controller Controller Board
Controller Subset Controller Board
Font
S-37
Setting/Precautions
Setting/Precautions