Hardware Flow Control - Datalogic Magellan 3200VSi Product Reference Manual

RS-232 Interface Features — cont.

Hardware Flow Control

Disable Hardware Control—
CTS line.
Enable CTS Flow Control—
Enable CTS Scan Control—
While the CTS line is inactive, the scanner remains in a host-disabled state; following a success-
ful label transmission, the CTS signal must transition to inactive and then to active to enable
scanning for the next label.
START / END
Enable CTS Flow Control
Product Reference Guide
The scanner transmits to the host regardless of any activity on the
The CTS signal controls transmission of data to the host.
The CTS line must be active for the scanner to read and transmit data.
PROGRAMMING bar codes
Disable Hardware Control
DEFAULT
Enable CTS Scan Control
Interface Features
45