Global Prefix/Suffix - Datalogic Magellan 3200VSi Product Reference Manual

Data Editing

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before the bar code data) and/
or as a suffix (in a position following the bar code data).
START / END
Sets up to 20 characters each from the set of ASCII characters or any hex value from 00 to FF. To configure this feature, scan the
"START/END" bar code above to place the unit in Programming Mode, then the "Set Prefix" or "Set Suffix," followed by the digits from
the Alphanumeric table in
Appendix C, Alpha-Numeric Pad
ple: Setting a Prefix on page 152
(scan "START/END" twice if less than 20 characters have been selected).
Set Suffix
74
PROGRAMMING bar codes
representing your desired character(s). Reference the section,
, for more information. Exit programming mode by scanning the "START/END" bar code again
DEFAULT SETTING PREFIX: 00 (None)
DEFAULT SETTING SUFFIX: 0D (CR)
Set Prefix
Magellan TM
Exam-
3200VSi