Adapter Setup Menu - LSI LSIU40SE User Manual

3.2.2.1

Adapter Setup Menu

3-8
You are returned to this menu after making changes to the configuration
of any host adapter or connected SCSI device. Before you exit this menu,
you are prompted to save or cancel any changes.
When you select Adapter Setup, the Adapter Setup menu appears.
Figure 3.6 is an example of the Adapter Setup Menu.
Figure 3.6 Adapter Setup Menu
Adapter Setup
SCAM Support
Parity
Host SCSI ID
Scan Order
Removable Media Support None
CHS Mapping
Spinup Delay (sec)
Help
Restore Default Setup
Exit this menu
The settings in this menu are global settings that affect the selected host
adapter and all SCSI devices attached to it. One of these choices can
be selected by highlighting it and pressing Enter.
SCAM Support – The LSI Logic BIOS Version 4.xx and above supports
the SCSI Plug and Play protocol called SCAM (SCSI Configured
AutoMatically). SCAM support by default is off in adapter BIOS versions
4.09 and later for the LSI53C876 device. The user may choose to turn
this on only if the system drivers do not require SCAM off. Note that if
this BIOS is flashed onto a board with existing settings, then these
settings are not changed to reflect the new BIOS defaults. Go into the
Configuration Utility to change these settings.
Configuring the LSIU40SE
Off
Enabled
7
Low to High <0..Max>
SCSI Plug & Play Mapping
2