2.2.3
Connecting the SCSI Peripherals
2-6
Figure 2.2
Inserting the Host Adapter
Step 8. The bracket around the connectors J3 and J7 (see
should fit where you removed the blank panel. Secure it with
the bracket screw (see
and external SCSI bus connections.
SCSI bus connections to the LSIU40SE are made with an unshielded,
68 or 50-conductor ribbon cable (see
is marked with a color to indicate the pin-1 side. Sometimes the
connectors on this cable are keyed to ensure proper pin-1 connection.
Installing the LSIU40SE
Bracket Screw
Figure
2.2) before making the internal
Figure
32-bit slots
64-bit slots
Figure
2.3). One side of this cable
2.1)