Configuration Utility Main Menu - LSI LSIU40SE User Manual

3.2.1 Configuration Utility Main Menu
Important: This utility is a powerful tool. If, while using it, you somehow
disable all of your controllers, pressing Ctrl-A (or Ctrl-E on
version 4.04 or later) after memory initialization during
reboot allows you to re-enable and reconfigure.
Not all devices detected by the Configuration Utility can be
controlled by the BIOS. Devices such as tape drives and
scanners require that a device driver specific to that
peripheral be loaded. The device driver is provided by the
device manufacturer.
When you start the LSI Logic SCSI BIOS Configuration Utility, the Main
Menu appears. This menu displays a list of up to four LSI Logic PCI to
SCSI host adapters and information about each of them. The LSIU40SE
appears on the menu as two LSI53C875 entries; one for each channel.
To select an adapter, use only the arrow keys and enter key. Then, you
can view and/or change the current settings for that adapter and the
SCSI devices attached to it.
You can select an adapter only if Current Status is "On". Changes are
possible since NVRAM is present on the host adapter.
Starting the SCSI BIOS Configuration Utility 3-3