Table of Contents
Advertisement
A.1.3
Thermal, Atmospheric Characteristics
A.1.4
Electromagnetic Compliance
A.1.5
Safety Characteristics
A.2 Operational Environment
A.2.1
The PCI Interface
The board is designed to operate in an environment defined by the
following parameters:
•
Temperature range: 0 ˚C to 55 ˚C (dry bulb)
•
Relative humidity range: 0% to 90% noncondensing
•
Maximum dew point temperature: 32 ˚C
The board is designed and implemented to minimize electromagnetic
emissions, susceptibility, and the effects of electromagnetic discharge.
The board meets the requirements of FCC and CISPR Class B limits and
is marked with the FCC Self Certification logo. It also carries the CE
mark.
The bare board meets or exceeds the requirements of UL flammability
rating 94 V0. The bare board is also marked with the supplier's name or
trademark, type, and UL flammability rating. Since this board is installed
in a PCI bus slot, all voltages are below the SELV 42.4 V limit.
The LSIU40SE is designed for use in PCI computer systems with an
ISA/EISA bracket type. The LSI Logic SDMS software operates the
board, but the design of the board does not prevent the use of other
software.
The PCI interface operates as a 32-bit DMA bus master. The connection
is made through edge connector J1, which provides connections on both
the front and back of the board. The signal definitions and pin numbers
conform to the PCI Local Bus Specification Revision 2.1 standard.
Table A.1
and
Table A.2
Operational Environment
show the signal assignments.
A-3
Advertisement
Table of Contents
