Making Internal Scsi Bus Connections; Internal Wide Scsi Ribbon Cable To Host Adapter Connection - LSI LSIU40SE User Manual

2.2.4

Making Internal SCSI Bus Connections

This section provides step-by-step instructions about making internal
SCSI bus connections.
Step 1. If you are connecting an internal Wide SCSI device, plug the
68-pin connector on one end of a wide internal SCSI ribbon
cable into the connector J2 or J6 (see
Figure 2.4 Internal Wide SCSI Ribbon Cable to Host Adapter
Connection
Detailed Installation Procedure
J6
J2
Figure 2.4).
2-9