Internal Scsi Connections; Internal Scsi Device Termination - LSI LSIU40SE User Manual

2.2.7

Internal SCSI Connections

2-20
If you have only internal SCSI device connections to the host adapter,
you must terminate the last internal device on the SCSI bus. You must
disable the termination on all other devices. Termination on the host
adapter is automatically enabled in this case.
Figure 2.14 shows an example of how termination is determined for this
SCSI bus configuration.
Figure 2.14 Internal SCSI Device Termination
Installing the LSIU40SE