2.2.5
Making External SCSI Bus Connections
2-16
This section provides step-by-step instructions about making external
SCSI bus connections.
Step 1. To connect external SCSI devices to the LSIU40SE, plug the
68-pin connector on one end of a shielded external SCSI
VHDCI cable (see
J3 or J7 (see
This connector is now bracketed to the back panel of your
computer.
Figure 2.11
Figure 2.11 External Cable to Host Adapter
Installing the LSIU40SE
Figure
2.3) into the host adapter connector
Figure
2.1).
shows how this connection is made.