Table of Contents
Advertisement
2.1
Quick Installation Procedure
Chapter 2
Installing the LSIU40SE
This chapter provides instructions on how to install the LSIU40SE and
includes these topics:
•
Section 2.1, "Quick Installation Procedure," page 2-1
•
Section 2.2, "Detailed Installation Procedure," page 2-3
•
Section 2.3, "Completing the Installation," page 2-28
This section is provided for the experienced computer user with prior
host adapter installation and SCSI bus setup experience. If you prefer a
more detailed guidance in installing the LSIU40SE, please follow the
instructions in
Section 2.2, "Detailed Installation Procedure."
For safe and proper installation, check the user's manual supplied with
your computer and perform the following steps.
Step 1. Ground yourself before removing this host adapter board.
Remove the LSIU40SE from the packing and check that it is not
damaged. An example of this host adapter board is shown in
Figure
2.1.
Step 2. Switch off and unplug the system.
Step 3. Remove the cabinet cover on your computer to access the PCI
slots. Refer to the user's manual for your computer.
Caution:
Ground yourself by touching a metal surface before
handling boards. Static charges on your body can damage
electronic components. Handle plug-in boards by the edge;
do not touch board components or gold connector contacts.
The use of a static ground strap is recommended.
LSIU40SE Dual Channel PCI to Ultra SCSI Host Adapter
2-1
Advertisement
Table of Contents
