Connecting Scsi Devices; Connecting Internal Scsi Devices; Connecting Internal Scsi Cable To Host Adapter - LSI LSI20320 User Manual

2.3 Connecting SCSI Devices

2.3.1 Connecting Internal SCSI Devices

2-6
This section explains how to connect internal and external SCSI devices
to the Ultra320 SCSI host adapters.
This subsection provides step-by-step instructions for connecting internal
SCSI devices. The figures show the LSI22320 host adapter, which has
two internal connectors and two external connectors. Other Ultra320
SCSI host adapter models have different numbers of connectors. Refer
to Section 2.2.1, "Internal SCSI Cables," on page 2-4
internal cables. Follow these steps for making connections:
Step 1. Plug the 68-pin connector on the end of the SCSI ribbon
cable into the internal connector on the host adapter, as
Figure 2.8
Figure 2.8

Connecting Internal SCSI Cable to Host Adapter

Detailed Host Adapter Installation
Version 2.3 Copyright © 2002–2004, 2006 by LSI Logic Corporation. All rights reserved.
shows.
for examples of
.