Full Page On Skip Suppress - IBM 3 User Manual

10. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Full Page On Skip Suppress

You can set the Full Page on Skip Suppress to:
Standard (Default)
Alternate
Note: The printer performs a partial reset to put any change to this parameter
To change or check the full page on skip suppress setting, follow these steps:
114
4247 Model 003 User's Guide
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Coax Configuration
Programmed Symbols
5. Press Enter.
6. Press Scroll or Scroll until the printer displays
Programmed Symbols
Plane Selection
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for plane selection is
displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
The printer will leave white space at the end of the page.
If the printer is printing skip-suppressed data, the printer will print on the
entire page as defined by the bottom margin (SCS) or MPL.
value into effect when you exit the Configuration Menu with Start or
Return. Buffered data will be lost.
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Coax Configuration
Programmed Symbols
5. Press Enter.