Attachment Cables For As/400 Workstation Controllers; Attachment Cable For Risc System/6000; Cable Configurations; Rs-232C - IBM 3 User Manual

Note: Before you place an order, contact your IBM marketing representative to

Attachment Cables for AS/400 Workstation Controllers

The table below lists part numbers to use when ordering a cable.
Note: Before you place an order for a cable, contact your IBM marketing

Attachment Cable for RISC System/6000

The table below lists a part number to use when ordering a cable.
Note: Before you place an order for a cable, contact your IBM marketing

Cable Configurations

Cable configurations depend on the computer or devices and machines in the
controlling system. The following diagrams show some of the possible
configurations for the RS-232C and RS-422A connection.

RS-232C

Local Simplex – DTR Pacing
Computer
SG
(7)
TXD (2)
CTS (5) or DSR (6)
334
4247 Model 003 User's Guide
verify the current part number.
Interface Type

RS-232C

RS-422A

representative to verify the current part number.
Interface Type
RS-232C
RS-422A
representative to verify the current part number.
Interface Type
RS-232C Serial Cable Kit: IBM Async Cable EIA-232/V.24
and Printer/Terminal Interposer EIA-232
Cable Part Number
8509386
70X8652
Cable Part Number
21F4342
21F4346
Printer
(7)
SG
(3) RXD
(20) DTR
(4) RTS
(6) DSR
IBM Standard Length
6.1 m (20 ft)
15.2 m (50 ft)
IBM Standard Length
12.2 m (40 ft)
30.5 m (100 ft)
Cable Part Number
08H6957