Programmed Symbols - IBM 3 User Manual

Enabled
To change or check the Form Feed Suppression selection, follow these steps:
1. Press Menu.
2. Press Scroll
3. Press Enter.
4. Press Scroll
5. Press Enter and the printer displays
6. Press Enter to display the current value.
7. Press Scroll
8. Press Enter. An asterisk (*) will be displayed in front of the selected value.
9. Press Start or Return to exit the Menu.

Programmed Symbols

If your host computer does not use IPDS, Programmed Symbols are an alternative
way to print graphics. When Programmed Symbols are enabled, IPDS is disabled.
You can set Programmed Symbols to:
v Disabled (Default)
v Enabled
Note: The printer performs a partial reset to put any change to this parameter
To change or check the programmed symbols value, follow these steps:
The printer will ignore Form Feed commands that are received when the
printer is already at the first print position at the top of the form.
or Scroll
CONFIGURATION MENU
Coax Configuration
or Scroll
Coax Configuration
Printer Compatibility
Printer Compatibility
FF Suppression
or Scroll
displayed.
value into effect when you exit the Configuration Menu with Start or
Return. Buffered data will be lost.
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Coax Configuration
Printer Compatibility
until the printer displays
until the printer displays
until the desired value for Form Feed Suppression is
Chapter 8. Coax Configuration
109