Printer Compatibility; Printer Compatibility 2 (New Line At Mpp + 1) - IBM 3 User Manual

10. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Printer Compatibility 2 (New Line at MPP + 1)

You can set the printer to automatically execute a new line at one position past the
current Maximum Print Position value. You can set this value to:
Standard (Default)
Alternate
Note: The printer performs a partial reset to put any change to this parameter
To change or check the new line at MPP + 1, follow these steps:
100
4247 Model 003 User's Guide
6. Press Scroll or Scroll until the printer displays

Printer Compatibility

1 (CR at MPP+1)
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for carriage return is
displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
An automatic new line executes at MPP + 1, then a new line executes. The
next print position will be the first print position of the current line + 2.
No automatic new line executes. The new line executes at MPP + 1. The
next print position will be the first print position of the next line.
value into effect when you exit the Configuration Menu with Start or
Return. Buffered data will be lost.
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
CONFIGURATION MENU
Coax Configuration
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
Coax Configuration
Printer Compatibility
5. Press Enter.
6. Press Scroll or Scroll until the printer displays
Printer Compatibility
2 (NL at MPP+1)
7. Press Enter to display the current value.
8. Press Scroll or Scroll until the desired value for a new line at MPP + 1 is
displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.