Installation Procedure - IBM 3 User Manual

Installation Procedure

200
4247 Model 003 User's Guide
v Pull the bottom release levers toward you with your finger tips and push
the movable edge of the tractor down toward the flat surface with your
thumbs (1) until the tractor locks in the fully extended position (2).
1. The power switch is located on the lower left side of the printer. Ensure that
the printer is powered off (O) before removing or installing forms tractors.
2. Open the top cover and tilt it all the way back.
Attention: Do not remove the top cover or automatic sheet feeder cover
unless it is necessary for the installation of a printer accessory. If a cover is
removed, do not touch inside the printer or insert any object into the gears.
Store the cover in a safe place until it is needed for reinstallation.