Asf Bin 1 Left Margin Alignment - IBM 3 User Manual

Fixed 1 to 8
To change or check the ASF Bin 1 AFTA:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for ASF Bin 1 AFTA is
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

ASF Bin 1 Left Margin Alignment

This parameter adjusts the distance of the first print position to the left margin
from 0 to 60 units (where each unit is 0.706 mm [1/36 in.]). The default is 10 units.
The total range of adjustment is 42.36 mm (1.66 in.).
To change or check the ASF Bin 1 Left Margin Alignment:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for ASF Bin 1 Left Margin
7. Press Enter.
printhead. Each adjustment corresponds to 0.03 mm (.0012 in.). (The
default is 0, which corresponds to a gap of 0.25 mm [.01 in.] from the
paper.)
Selects a fixed printhead distance value from 1 to 8 (where each value
equals approximately 0.05 mm [.002 in.]).
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments
ASF Bin 1 AFTA
displayed.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
CONFIGURATION MENU
Printer Adjustments
Printer Adjustments

ASF Bin 1 Left Margin Alignment

Alignment is displayed.
An asterisk (*) will be displayed in front of the selected value.
Chapter 11. Printer Adjustments
165