Printing Custom Sets - IBM 3 User Manual

4. Press Scroll or Scroll until the printer displays
5. Press Enter.
6. Press Enter.
7. Use Start or Return to exit the Menu. See "Exiting the Configuration Menu" on

Printing Custom Sets

Use this function to create a printout of the eight custom set values.
On the first page of the printout, each custom set is identified as either In Use or
as Factory Defaults.
In Use
Factory Defaults
If a custom set is identical to the factory defaults, it will be identified as Factory
Defaults. If the only change from factory defaults is a non-custom set parameter
value (a value that stays the same no matter which custom set you are using, such
as Twinax Address), only the first custom set will be identified as In Use. The
other custom sets will be shown as factory defaults.
To print the custom sets:
1. Press Stop to make the printer not ready.
2. Press Test.
3. Press Scroll or Scroll until the printer displays
4. Use Enter or Start to begin the test. The printout will list all the custom sets.
5. Press Cancel Print to make the printer ready, or Return to make the printer not
72
4247 Model 003 User's Guide
Configuration Storage
Recall Factory Defaults
The printer displays
Recall Factory Defaults
Yes
The printer displays
Recall Factory Defaults
Factory Defaults Recalled
page 55.
At least one value in the custom set is different from the factory default
value. A flag (****) is printed after each parameter value that is different
from the factory default.
A custom set that is identical to one of the factory defaults.
4247 OPERATOR PRINT TESTS
Print Custom Sets
The Ready indicator is lighted, and the Print Test prints. The printout is
complete when the Ready indicator is no longer lighted.
ready.