Print Quality - IBM 3 User Manual

Note: This parameter can be overridden by the computer.
To change or check the MPL, follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for MPL is displayed.
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Print Quality

You can set the Print Quality for the printer to any of the following values:
v DP (Data Processing) Quality (Default)
v DP Text Quality
v Near Letter Quality (NLQ).
Notes:
1. This parameter can be overridden by the computer.
2. Only Near Letter Quality is valid when either OCR-A or OCR-B is selected as
To change or check the Print Quality, follow these steps:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Print Quality is displayed.
7. Press Enter.
80
4247 Model 003 User's Guide
CONFIGURATION MENU
Twinax Configuration
Twinax Configuration
Maximum Page Length
An asterisk (*) will be displayed in front of the selected value.
on page 55.
the print language.
CONFIGURATION MENU
Twinax Configuration
Twinax Configuration
Print Quality
An asterisk (*) will be displayed in front of the selected value.