Automatic Manual Load - IBM 3 User Manual

2. Press Scroll or Scroll until the printer displays:
3. Press Enter.
4. Press Scroll or Scroll until the printer displays:
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Manual Paper Overlay is
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"

Automatic Manual Load

This parameter is only available for Manual Sheet Feed. You can set automatic load
to one of the following values:
Enabled (Default)
Disabled
To change or check the Automatic Manual Load value:
1. Press Menu.
2. Press Scroll or Scroll until the printer displays
3. Press Enter.
4. Press Scroll or Scroll until the printer displays
5. Press Enter to display the current value.
6. Press Scroll or Scroll until the desired value for Automatic Manual Load is
7. Press Enter.
8. Press Start or Return to exit the Menu. See "Exiting the Configuration Menu"
CONFIGURATION MENU
Printer Setup
Printer Setup
Manual Paper Overlay
displayed.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
Enables the quick printing function. This means that a cut-sheet form will
be automatically loaded when inserted into the printer.
Disables the quick printing function. This means that a cut-sheet form will
not be automatically loaded when inserted into the printer. To load the
form, press Load/Eject.
CONFIGURATION MENU
Printer Setup
Printer Setup
Automatic Manual Load
displayed.
An asterisk (*) will be displayed in front of the selected value.
on page 55.
153
Chapter 10. Printer Setup