Web Interface; System Status - ATCOM AT800D User Manual

AT800 Series User Manual
1. Connect Type:
2. Current IP:
3. Hostname:
4. Domain:
5. Current Netmask: The current netmask
6. Current Gateway: The gateway address
7. Enable Web Server: Access by web interface. Default is set to yes. If disabled, user will not
able to access webpage.
8. Non‐DHCP IP Address: Static IP address
9. Non‐DHCP Subnet Mask:
10. Non‐DHCP default route:
11. Non‐DHCP DNS1/DNS2: Primary DNS and Secondary DNS working in static IP.
12. Enable VLAN: Enable/disable VLAN
Web Interface
Please check the IP address of the unit in menu settings, refer to LAN port . Access WEB interface by
following steps:
Enter the IP address (e.g. http://192.168.1.100) in the browser
It enters user webpage by default, and user can click admin button on the right corner to
switch to admin login.
There are two web login levels: admin/user. They have no password by default, however, you can set
passwords in Network‐‐>Advance webpage. In user login level, VLAN, Port link, Qos, syslog, SIP
settings, Ring, Manual update, Auto provision and Reset are not able to be changed.
System status
The system status display basic information about the system:
ATCOM TECHNOLOGY CO., LIMITED
DHCP, Static
IP address
Hostname
The domain name
Static netmask address
Static gateway address
www.atcom.cn