Network; Lan Port; Web Interface; System Status - ATCOM AT800 series User Manual

AT800 AT800 AT800 AT800 Series
We We Web b b b Interface
We
AT800x is working at route mode by default, and provide DHCPD service on PC port. Connect computer
on PC port, and make PC work in DHCP mode. After getting an IP address as 192.168.10.20 by default,
access WEB interface by following steps:
�
�
System System System

System status

The system status display basic information about the system:

Network

Network
Network Network
There are three sub-menus under network option: LAN Port, PC Port, Advance.
LAN LAN LAN

LAN Port

Set IP mode on LAN port. It supports Static IP,DHCP and PPPoE mode.
ATCOM TECHNOLOGY CO., LIMITED
Downloaded from www.Manualslib.com
Series Series Series User User User User Manual Manual Manual Manual
Interface Interface
Interface
Enter the IP address (default: 192.168.10.1) in the browser
It enters user webpage by default, and user can click admin
admin admin
switch to admin admin login.
status status status
Port Port Port
manuals search engine
admin
admin button on the right corner to admin
www.atcom.cn