Lan Port; Web Interface; Network - ATCOM AT800 Series User Manual

AT800 AT800 AT800 Series AT800 Series Series Series User User Manual User User
We Web b b b Interface Interface
We We Interface Interface
AT800x is working at route mode by default, and provide DHCPD service on PC port. Connect computer
on PC port, and make PC work in DHCP mode. After getting an IP address as 192.168.10.20 by default,
access WEB interface by following steps:
� Enter the IP address (default: 192.168.10.1) in the browser
� It enters user webpage by default, and user can click admin
switch to admin admin admin admin login.
System status
System System System status status status
The system status display basic information about the system:

Network

Network Network Network
There are three sub-menus under network option: LAN Port, PC Port, Advance.
LAN LAN Port Port
LAN

LAN Port

Port
Set IP mode on LAN port. It supports Static IP,DHCP and PPPoE mode.
ATCOM TECHNOLOGY CO., LIMITED
All manuals and user guides at all-guides.com
Manual Manual Manual
admin admin button on the right corner to admin
www.atcom.cn